Description
Pure white is the most widely specified white in commercial signage, hoarding and architectural cladding. These 32mm x 4.2mm flange head self tapping screws in RAL 9010 Pure White are powder coated to match the clean, natural white used across the full breadth of commercial panel systems, hoarding boards and facade installations throughout the UK. On a white surface, a zinc or uncoated fixing reads immediately as a grey-metallic interruption that breaks the uniformity of the panel face.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 9010 Pure White
RAL 9010 Pure White is the standard white across commercial signage, industrial panelling and general-purpose white cladding systems throughout the UK. It is a natural, balanced white without the cool blue influence of RAL 9016 Traffic White or the warm cream undertone of RAL 1013 Oyster White, which makes it the default white specification across the widest range of panel types and applications. Ask any signage installer or cladding contractor which white they use most frequently, and RAL 9010 is the answer.
Each screw head is powder coated to the exact RAL 9010 Classic standard. On large panel runs where dozens or hundreds of fixings are visible across the face of an installation, the colour-matched head eliminates the scattered metallic dots that standard zinc screws leave behind. The difference between a colour-matched and an unmatched fixing on a white panel is one of the most visible in the entire range, which is why RAL 9010 is consistently one of the highest-volume colours in the RALfixings stock.
RAL 9010 is the correct specification for the majority of white hoarding boards, white-painted signage trays, white ACM panel systems and white commercial fascia products. Where a panel reads as a very bright, cool white, RAL 9016 may be the closer match. Where it carries any warmth or cream quality, RAL 1013 is likely more accurate.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
32mm painted flange head screws in RAL 9010 Pure White are used across:
- Construction site hoarding panels in standard white and pure white colour schemes
- Commercial signage trays, retail fascia systems and architectural cladding in RAL 9010
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards where the panel background is pure white
- Service enclosures, ventilation duct cladding and access panels finished in RAL 9010
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9010 Pure White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
How do I know whether to order RAL 9010 Pure White or RAL 9016 Traffic White?
RAL 9010 Pure White is the correct specification for the majority of white panel systems, hoarding boards and commercial cladding products. RAL 9016 Traffic White is a cooler, brighter white with a slight blue influence, used where maximum brightness and crispness are the brief. If your panels read as a natural, balanced white without a strong cool or blue-white quality, RAL 9010 is almost certainly the correct match. If the surface reads as a very sharp, clinical bright white, check against RAL 9016 before ordering.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 9010 Pure White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Description
Pure white is the most widely specified white in commercial signage, hoarding and architectural cladding. These 32mm x 4.2mm flange head self tapping screws in RAL 9010 Pure White are powder coated to match the clean, natural white used across the full breadth of commercial panel systems, hoarding boards and facade installations throughout the UK. On a white surface, a zinc or uncoated fixing reads immediately as a grey-metallic interruption that breaks the uniformity of the panel face.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 9010 Pure White
RAL 9010 Pure White is the standard white across commercial signage, industrial panelling and general-purpose white cladding systems throughout the UK. It is a natural, balanced white without the cool blue influence of RAL 9016 Traffic White or the warm cream undertone of RAL 1013 Oyster White, which makes it the default white specification across the widest range of panel types and applications. Ask any signage installer or cladding contractor which white they use most frequently, and RAL 9010 is the answer.
Each screw head is powder coated to the exact RAL 9010 Classic standard. On large panel runs where dozens or hundreds of fixings are visible across the face of an installation, the colour-matched head eliminates the scattered metallic dots that standard zinc screws leave behind. The difference between a colour-matched and an unmatched fixing on a white panel is one of the most visible in the entire range, which is why RAL 9010 is consistently one of the highest-volume colours in the RALfixings stock.
RAL 9010 is the correct specification for the majority of white hoarding boards, white-painted signage trays, white ACM panel systems and white commercial fascia products. Where a panel reads as a very bright, cool white, RAL 9016 may be the closer match. Where it carries any warmth or cream quality, RAL 1013 is likely more accurate.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
32mm painted flange head screws in RAL 9010 Pure White are used across:
- Construction site hoarding panels in standard white and pure white colour schemes
- Commercial signage trays, retail fascia systems and architectural cladding in RAL 9010
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards where the panel background is pure white
- Service enclosures, ventilation duct cladding and access panels finished in RAL 9010
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9010 Pure White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
How do I know whether to order RAL 9010 Pure White or RAL 9016 Traffic White?
RAL 9010 Pure White is the correct specification for the majority of white panel systems, hoarding boards and commercial cladding products. RAL 9016 Traffic White is a cooler, brighter white with a slight blue influence, used where maximum brightness and crispness are the brief. If your panels read as a natural, balanced white without a strong cool or blue-white quality, RAL 9010 is almost certainly the correct match. If the surface reads as a very sharp, clinical bright white, check against RAL 9016 before ordering.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 9010 Pure White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Pure white is the most widely specified white in commercial signage, hoarding and architectural cladding. These 32mm x 4.2mm flange head self tapping screws in RAL 9010 Pure White are powder coated to match the clean, natural white used across the full breadth of commercial panel systems, hoarding boards and facade installations throughout the UK. On a white surface, a zinc or uncoated fixing reads immediately as a grey-metallic interruption that breaks the uniformity of the panel face.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 9010 Pure White
RAL 9010 Pure White is the standard white across commercial signage, industrial panelling and general-purpose white cladding systems throughout the UK. It is a natural, balanced white without the cool blue influence of RAL 9016 Traffic White or the warm cream undertone of RAL 1013 Oyster White, which makes it the default white specification across the widest range of panel types and applications. Ask any signage installer or cladding contractor which white they use most frequently, and RAL 9010 is the answer.
Each screw head is powder coated to the exact RAL 9010 Classic standard. On large panel runs where dozens or hundreds of fixings are visible across the face of an installation, the colour-matched head eliminates the scattered metallic dots that standard zinc screws leave behind. The difference between a colour-matched and an unmatched fixing on a white panel is one of the most visible in the entire range, which is why RAL 9010 is consistently one of the highest-volume colours in the RALfixings stock.
RAL 9010 is the correct specification for the majority of white hoarding boards, white-painted signage trays, white ACM panel systems and white commercial fascia products. Where a panel reads as a very bright, cool white, RAL 9016 may be the closer match. Where it carries any warmth or cream quality, RAL 1013 is likely more accurate.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
32mm painted flange head screws in RAL 9010 Pure White are used across:
- Construction site hoarding panels in standard white and pure white colour schemes
- Commercial signage trays, retail fascia systems and architectural cladding in RAL 9010
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards where the panel background is pure white
- Service enclosures, ventilation duct cladding and access panels finished in RAL 9010
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9010 Pure White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
How do I know whether to order RAL 9010 Pure White or RAL 9016 Traffic White?
RAL 9010 Pure White is the correct specification for the majority of white panel systems, hoarding boards and commercial cladding products. RAL 9016 Traffic White is a cooler, brighter white with a slight blue influence, used where maximum brightness and crispness are the brief. If your panels read as a natural, balanced white without a strong cool or blue-white quality, RAL 9010 is almost certainly the correct match. If the surface reads as a very sharp, clinical bright white, check against RAL 9016 before ordering.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 9010 Pure White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Recommended applications
Designed for fixing ACM panels, composite cladding, and timber facade boards to timber battens and structural substrates. The powder-coated head matches your panel RAL precisely, eliminating visible bright metal fixings against the facade surface.
At 32mm, these screws provide deeper thread engagement than shorter alternatives, making them the ideal choice for thicker substrates, double-skin panels, or applications requiring increased pull-out resistance. Pre-drilling recommended for hardwoods over 20mm density.
Not recommended for fixing into steel framing — use our self-drilling range for steel substrates.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
