Description
PanelPro™ HP19 in RAL 9005 Jet Black are strong 19mm low-profile wafer head hoarding & ACM panel fixing screws developed for high-spec construction hoardings, ACM (Dibond™) panels, Foamex boards and large-format temporary facades where a discreet, architectural finish is essential.
Jet Black is one of the most specified colours in UK construction and retail environments. When visible fixings need to blend seamlessly into darker panels, graphics or steelwork, PanelPro™ provides a consistent, controlled installation solution.
PanelPro™ HP19 is engineered specifically for hoarding systems. The low-profile wafer head reduces visual prominence across long panel runs, while the fine-thread sharp point delivers clean penetration into timber and light-gauge steel framing without excessive material stress.
Unlike generic painted screws, PanelPro™ standardises hoarding installations across projects, improving visual consistency and reducing site variability between crews.
Architectural Colour Consistency
Finished in RAL 9005 Jet Black, the powder-coated head integrates naturally with dark ACM sheets, matte black hoarding panels, retail graphics and perimeter fencing systems.
Jet Black remains one of our highest-volume colours and is held in strong stock for rapid dispatch. Additional RAL finishes are available throughout the full PanelPro™ collection.
Optimised for Site Installation
PanelPro™ HP19 is suitable for:
- Perimeter construction hoardings
- Retail development hoardings
- ACM / Dibond™ panel installations
- Foamex graphic boards
- Temporary screening and facade systems
Typical fixing centres: 300mm to 450mm depending on panel dimensions and wind loading requirements.
Pack Sizes Available
Supplied in trade-ready quantities of:
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 19mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Fine Thread |
| Point Type | Sharp Point |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9005 Jet Black |
| Standard | EN 14566 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP19 technical specification.
Frequently asked questions
Are these suitable for ACM and Dibond™ panels?
Yes. PanelPro™ HP19 is engineered specifically for ACM and printed hoarding panels. The low-profile head and consistent clamping performance make it ideal for large-format installations.
Can these be used externally?
PanelPro™ HP19 is suitable for external hoarding systems typical of UK construction projects. The powder coated head is weather resistant, colour stable and built for site conditions.
Do these match printed panel colours?
PanelPro™ screws are colour matched to industry standard RAL specifications. In this case, the head is finished to RAL 9005 Jet Black for seamless integration with dark panels and architectural elements.
What are the delivery and lead times on PanelPro screws?
We carry stock of all 61 colours, including Jet Black, allowing for next-day despatch on tracked 24 services. Larger volume orders are typically fulfilled within 3 to 5 working days.
Powder coated screws
At RALfixings, attention to finish is central to product performance. Every PanelPro screw is powder coated in-house to exact RAL standards.
The electrostatic coating process bonds colour at high temperature, producing a durable, uniform finish that significantly outperforms conventional painted coatings. The result is a robust, colourfast surface designed to withstand handling, installation and ongoing exposure.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other PanelPro™ HP19 colour options
PanelPro™ HP19 hoarding screws are available in over 60 colour matched RAL finishes to align with printed hoarding graphics and panel systems.
Description
PanelPro™ HP19 in RAL 9005 Jet Black are strong 19mm low-profile wafer head hoarding & ACM panel fixing screws developed for high-spec construction hoardings, ACM (Dibond™) panels, Foamex boards and large-format temporary facades where a discreet, architectural finish is essential.
Jet Black is one of the most specified colours in UK construction and retail environments. When visible fixings need to blend seamlessly into darker panels, graphics or steelwork, PanelPro™ provides a consistent, controlled installation solution.
PanelPro™ HP19 is engineered specifically for hoarding systems. The low-profile wafer head reduces visual prominence across long panel runs, while the fine-thread sharp point delivers clean penetration into timber and light-gauge steel framing without excessive material stress.
Unlike generic painted screws, PanelPro™ standardises hoarding installations across projects, improving visual consistency and reducing site variability between crews.
Architectural Colour Consistency
Finished in RAL 9005 Jet Black, the powder-coated head integrates naturally with dark ACM sheets, matte black hoarding panels, retail graphics and perimeter fencing systems.
Jet Black remains one of our highest-volume colours and is held in strong stock for rapid dispatch. Additional RAL finishes are available throughout the full PanelPro™ collection.
Optimised for Site Installation
PanelPro™ HP19 is suitable for:
- Perimeter construction hoardings
- Retail development hoardings
- ACM / Dibond™ panel installations
- Foamex graphic boards
- Temporary screening and facade systems
Typical fixing centres: 300mm to 450mm depending on panel dimensions and wind loading requirements.
Pack Sizes Available
Supplied in trade-ready quantities of:
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 19mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Fine Thread |
| Point Type | Sharp Point |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9005 Jet Black |
| Standard | EN 14566 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP19 technical specification.
Frequently asked questions
Are these suitable for ACM and Dibond™ panels?
Yes. PanelPro™ HP19 is engineered specifically for ACM and printed hoarding panels. The low-profile head and consistent clamping performance make it ideal for large-format installations.
Can these be used externally?
PanelPro™ HP19 is suitable for external hoarding systems typical of UK construction projects. The powder coated head is weather resistant, colour stable and built for site conditions.
Do these match printed panel colours?
PanelPro™ screws are colour matched to industry standard RAL specifications. In this case, the head is finished to RAL 9005 Jet Black for seamless integration with dark panels and architectural elements.
What are the delivery and lead times on PanelPro screws?
We carry stock of all 61 colours, including Jet Black, allowing for next-day despatch on tracked 24 services. Larger volume orders are typically fulfilled within 3 to 5 working days.
Powder coated screws
At RALfixings, attention to finish is central to product performance. Every PanelPro screw is powder coated in-house to exact RAL standards.
The electrostatic coating process bonds colour at high temperature, producing a durable, uniform finish that significantly outperforms conventional painted coatings. The result is a robust, colourfast surface designed to withstand handling, installation and ongoing exposure.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other PanelPro™ HP19 colour options
PanelPro™ HP19 hoarding screws are available in over 60 colour matched RAL finishes to align with printed hoarding graphics and panel systems.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
What our customers say
Posted by Moss UK Group on 23rd Mar 2026
Great hoarding screw, fantastic service and speedy turn around. Cannot fault the product or the company, the team always go above and beyond to fulfil our orders.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
PanelPro™ HP19 in RAL 9005 Jet Black are strong 19mm low-profile wafer head hoarding & ACM panel fixing screws developed for high-spec construction hoardings, ACM (Dibond™) panels, Foamex boards and large-format temporary facades where a discreet, architectural finish is essential.
Jet Black is one of the most specified colours in UK construction and retail environments. When visible fixings need to blend seamlessly into darker panels, graphics or steelwork, PanelPro™ provides a consistent, controlled installation solution.
PanelPro™ HP19 is engineered specifically for hoarding systems. The low-profile wafer head reduces visual prominence across long panel runs, while the fine-thread sharp point delivers clean penetration into timber and light-gauge steel framing without excessive material stress.
Unlike generic painted screws, PanelPro™ standardises hoarding installations across projects, improving visual consistency and reducing site variability between crews.
Architectural Colour Consistency
Finished in RAL 9005 Jet Black, the powder-coated head integrates naturally with dark ACM sheets, matte black hoarding panels, retail graphics and perimeter fencing systems.
Jet Black remains one of our highest-volume colours and is held in strong stock for rapid dispatch. Additional RAL finishes are available throughout the full PanelPro™ collection.
Optimised for Site Installation
PanelPro™ HP19 is suitable for:
- Perimeter construction hoardings
- Retail development hoardings
- ACM / Dibond™ panel installations
- Foamex graphic boards
- Temporary screening and facade systems
Typical fixing centres: 300mm to 450mm depending on panel dimensions and wind loading requirements.
Pack Sizes Available
Supplied in trade-ready quantities of:
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 19mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Fine Thread |
| Point Type | Sharp Point |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 9005 Jet Black |
| Standard | EN 14566 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP19 technical specification.
Frequently asked questions
Are these suitable for ACM and Dibond™ panels?
Yes. PanelPro™ HP19 is engineered specifically for ACM and printed hoarding panels. The low-profile head and consistent clamping performance make it ideal for large-format installations.
Can these be used externally?
PanelPro™ HP19 is suitable for external hoarding systems typical of UK construction projects. The powder coated head is weather resistant, colour stable and built for site conditions.
Do these match printed panel colours?
PanelPro™ screws are colour matched to industry standard RAL specifications. In this case, the head is finished to RAL 9005 Jet Black for seamless integration with dark panels and architectural elements.
What are the delivery and lead times on PanelPro screws?
We carry stock of all 61 colours, including Jet Black, allowing for next-day despatch on tracked 24 services. Larger volume orders are typically fulfilled within 3 to 5 working days.
Powder coated screws
At RALfixings, attention to finish is central to product performance. Every PanelPro screw is powder coated in-house to exact RAL standards.
The electrostatic coating process bonds colour at high temperature, producing a durable, uniform finish that significantly outperforms conventional painted coatings. The result is a robust, colourfast surface designed to withstand handling, installation and ongoing exposure.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other PanelPro™ HP19 colour options
PanelPro™ HP19 hoarding screws are available in over 60 colour matched RAL finishes to align with printed hoarding graphics and panel systems.
In Stock
| Bulk Discount |
|---|