Description
Olive yellow is not a colour that standard fixings accommodate. The muted, earthy tone of RAL 1020 sits far enough from any neutral grey or white that a zinc screw head reads as a clear intrusion on the panel face. These 32mm x 4.2mm flange head self tapping screws in RAL 1020 Olive Yellow are powder coated to match the dull, khaki-influenced yellow used across architectural cladding, industrial enclosures and specialist hoarding installations where this colour has been specified.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 1020 Olive Yellow
RAL 1020 Olive Yellow sits at the intersection of yellow and green, with a strong grey undertone that desaturates the colour into a dull, earthy khaki. It is not a bright or high-visibility yellow. The tone sits closer to military olive and natural stone than to the clean yellows of the RAL 1000 series, which makes it a specification colour for applications requiring a muted, recessive yellow rather than one that draws attention.
This colour appears on industrial and agricultural structures, architectural cladding systems with a natural or earth-toned palette, specialist hoarding installations and equipment enclosures where the colour has been deliberately specified to blend with a surrounding environment. On these installations, a standard zinc or grey fixing stands out sharply against a surface with this level of chromatic complexity. Powder coating to RAL 1020 is the only way to produce a head that sits within the panel rather than contrasting with it.
Each screw head is finished to the exact RAL 1020 Classic standard, with consistent colour across the batch. On cladding runs and panel systems where fixings appear at regular intervals across the face, that consistency matters as much as the colour match itself.
All RAL colours in the RALfixings range are held in stock for immediate dispatch, without the lead times that special colour orders typically carry.
Suitable Applications
32mm painted flange head screws in RAL 1020 Olive Yellow are used across:
- Architectural cladding panels and facade systems specified in earth-toned or natural palettes
- Industrial and agricultural building enclosures finished in olive yellow
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Specialist hoarding installations where RAL 1020 forms part of the site branding or design scheme
- Equipment housings, service enclosures and access panels in olive yellow colour schemes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1020 Olive Yellow |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
What applications typically specify RAL 1020 Olive Yellow?
RAL 1020 is most commonly found on industrial and agricultural structures, earth-toned architectural cladding systems and equipment enclosures where a muted, desaturated yellow has been specified. It also appears on specialist hoarding installations and facade panels where the colour is part of a natural or military-influenced palette. It is not a high-visibility yellow; the grey undertone gives it a recessive, earthy quality suited to applications where the finish is meant to blend rather than stand out.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 1020 Olive Yellow is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Description
Olive yellow is not a colour that standard fixings accommodate. The muted, earthy tone of RAL 1020 sits far enough from any neutral grey or white that a zinc screw head reads as a clear intrusion on the panel face. These 32mm x 4.2mm flange head self tapping screws in RAL 1020 Olive Yellow are powder coated to match the dull, khaki-influenced yellow used across architectural cladding, industrial enclosures and specialist hoarding installations where this colour has been specified.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 1020 Olive Yellow
RAL 1020 Olive Yellow sits at the intersection of yellow and green, with a strong grey undertone that desaturates the colour into a dull, earthy khaki. It is not a bright or high-visibility yellow. The tone sits closer to military olive and natural stone than to the clean yellows of the RAL 1000 series, which makes it a specification colour for applications requiring a muted, recessive yellow rather than one that draws attention.
This colour appears on industrial and agricultural structures, architectural cladding systems with a natural or earth-toned palette, specialist hoarding installations and equipment enclosures where the colour has been deliberately specified to blend with a surrounding environment. On these installations, a standard zinc or grey fixing stands out sharply against a surface with this level of chromatic complexity. Powder coating to RAL 1020 is the only way to produce a head that sits within the panel rather than contrasting with it.
Each screw head is finished to the exact RAL 1020 Classic standard, with consistent colour across the batch. On cladding runs and panel systems where fixings appear at regular intervals across the face, that consistency matters as much as the colour match itself.
All RAL colours in the RALfixings range are held in stock for immediate dispatch, without the lead times that special colour orders typically carry.
Suitable Applications
32mm painted flange head screws in RAL 1020 Olive Yellow are used across:
- Architectural cladding panels and facade systems specified in earth-toned or natural palettes
- Industrial and agricultural building enclosures finished in olive yellow
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Specialist hoarding installations where RAL 1020 forms part of the site branding or design scheme
- Equipment housings, service enclosures and access panels in olive yellow colour schemes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1020 Olive Yellow |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
What applications typically specify RAL 1020 Olive Yellow?
RAL 1020 is most commonly found on industrial and agricultural structures, earth-toned architectural cladding systems and equipment enclosures where a muted, desaturated yellow has been specified. It also appears on specialist hoarding installations and facade panels where the colour is part of a natural or military-influenced palette. It is not a high-visibility yellow; the grey undertone gives it a recessive, earthy quality suited to applications where the finish is meant to blend rather than stand out.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 1020 Olive Yellow is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Olive yellow is not a colour that standard fixings accommodate. The muted, earthy tone of RAL 1020 sits far enough from any neutral grey or white that a zinc screw head reads as a clear intrusion on the panel face. These 32mm x 4.2mm flange head self tapping screws in RAL 1020 Olive Yellow are powder coated to match the dull, khaki-influenced yellow used across architectural cladding, industrial enclosures and specialist hoarding installations where this colour has been specified.
At 32mm, these screws provide the thread engagement needed where substrates are thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies and wind-loaded hoarding installations demand greater pull-out resistance than a shorter screw can deliver. The length is the correct specification for these conditions.
The flange head spreads clamping force across a wide bearing footprint rather than concentrating it at a point, preventing the dimpling and surface stress that narrower head designs cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly at installation torque with minimal cam-out, keeping the head surface and powder coat intact after fixing.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling, and pull cleanly through softwood timber battens with strong holding power in both substrate types.
RAL 1020 Olive Yellow
RAL 1020 Olive Yellow sits at the intersection of yellow and green, with a strong grey undertone that desaturates the colour into a dull, earthy khaki. It is not a bright or high-visibility yellow. The tone sits closer to military olive and natural stone than to the clean yellows of the RAL 1000 series, which makes it a specification colour for applications requiring a muted, recessive yellow rather than one that draws attention.
This colour appears on industrial and agricultural structures, architectural cladding systems with a natural or earth-toned palette, specialist hoarding installations and equipment enclosures where the colour has been deliberately specified to blend with a surrounding environment. On these installations, a standard zinc or grey fixing stands out sharply against a surface with this level of chromatic complexity. Powder coating to RAL 1020 is the only way to produce a head that sits within the panel rather than contrasting with it.
Each screw head is finished to the exact RAL 1020 Classic standard, with consistent colour across the batch. On cladding runs and panel systems where fixings appear at regular intervals across the face, that consistency matters as much as the colour match itself.
All RAL colours in the RALfixings range are held in stock for immediate dispatch, without the lead times that special colour orders typically carry.
Suitable Applications
32mm painted flange head screws in RAL 1020 Olive Yellow are used across:
- Architectural cladding panels and facade systems specified in earth-toned or natural palettes
- Industrial and agricultural building enclosures finished in olive yellow
- Thicker ACM and Dibond™ panel installations and double-skin assemblies requiring extended thread engagement
- Specialist hoarding installations where RAL 1020 forms part of the site branding or design scheme
- Equipment housings, service enclosures and access panels in olive yellow colour schemes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 32mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1020 Olive Yellow |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
What applications typically specify RAL 1020 Olive Yellow?
RAL 1020 is most commonly found on industrial and agricultural structures, earth-toned architectural cladding systems and equipment enclosures where a muted, desaturated yellow has been specified. It also appears on specialist hoarding installations and facade panels where the colour is part of a natural or military-influenced palette. It is not a high-visibility yellow; the grey undertone gives it a recessive, earthy quality suited to applications where the finish is meant to blend rather than stand out.
When should I use 32mm screws instead of 25mm?
The 32mm length is the right choice where the substrate is thicker, where panels are fixed to deeper timber battens, or where double-skin assemblies increase the distance between the panel face and the fixing frame. It provides greater pull-out resistance than the 25mm on exposed hoarding installations subject to wind loading, and is the correct specification wherever additional thread engagement is needed beyond what the 25mm can offer.
Can these be used to fix hoarding panels to timber frames?
Yes. The 32mm length and self-tapping AB point thread make these screws well suited to fixing panels to timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides solid engagement into the timber behind.
How quickly can you deliver?
RAL 1020 Olive Yellow is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 32mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Recommended applications
Designed for fixing ACM panels, composite cladding, and timber facade boards to timber battens and structural substrates. The powder-coated head matches your panel RAL precisely, eliminating visible bright metal fixings against the facade surface.
At 32mm, these screws provide deeper thread engagement than shorter alternatives, making them the ideal choice for thicker substrates, double-skin panels, or applications requiring increased pull-out resistance. Pre-drilling recommended for hardwoods over 20mm density.
Not recommended for fixing into steel framing — use our self-drilling range for steel substrates.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
