PanelPro™ HP19 Hoarding Screws - 19mm - RAL 6012 Black Green
Available in 60 colours
Finished in RAL 6012 Black Green, the PanelPro™ HP25 25mm hoarding screw is built for thicker panel build-ups and wind-loaded hoardings - a longer, higher-holding version of the HP19 fixing for printed graphics, ACM (Dibond®) and Foamex boards.
Unlike generic wafer head screws, PanelPro™ delivers controlled penetration and consistent clamping, reducing panel distortion and preventing over-compression of printed graphics.
HP25 sits alongside the PanelPro™ HP19 19mm hoarding screw in RAL 6012 Black Green and the self-drilling HP25-SD in the PanelPro™ system, so you can match point type to the frame and length to the build-up without changing colour or head profile.
The fine-thread sharp point drives cleanly into timber and light-gauge steel, while the low-profile powder-coated head ensures a clean, discreet finish across large-format hoarding. Use a variable-speed driver with a PH2 bit and avoid overdriving.
RAL 6012 Black Green is a very dark green for discreet fixings on dark cladding. Matching the fixing head to the panel keeps large runs looking uniform and hides the fixings against the graphic.
PanelPro™ HP25 is available in 40 colour-matched RAL finishes, held in stock for rapid dispatch so contractors and procurement teams can source consistent fixings across full and multi-site installations.
PanelPro™ HP25 is suitable for:
Typical fixing centres: 300mm - 450mm (subject to panel size and wind loading).
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Fine Thread |
| Point Type | Sharp Point |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 6012 Black Green |
| Standard | EN 14566 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP25 technical specification.
Step up to HP25 where the panel build-up is thicker, the frame timber is soft, fixing centres are wider, or the hoarding is tall or wind-exposed. The extra 6mm of thread gives greater embedment and withdrawal resistance. For standard single-skin panels, HP19 remains the go-to.
Yes. PanelPro™ HP25 is suitable for external hoarding installations typical of UK construction projects. The powder-coated head is weatherproof, colour-fast and durable.
Yes. The powder-coated head is colour matched to industry-standard RAL 6012 Black Green to help the fixings disappear into the panel for a clean, professional finish.
We hold stock across all 40 colours for quick next-day despatch on a tracked 24 service. Bulk or bespoke colour orders usually take around 3 - 5 working days.
Colour-matched fixings only work if the colour is right and lasts. That is why we powder coat all our coloured hoarding screws in-house to exact RAL specifications.
Powder coating electrostatically applies coloured powder to the fixing before curing it at high temperature, creating a hard, uniform layer that significantly outperforms painted finishes - durable, colourfast and built for site.
Benefits of powder coated hoarding screws:
PanelPro™ hoarding screws are available in 40 colour-matched RAL finishes to align with printed hoarding graphics and panel systems.
Match the point type to the frame and the length to the build-up:
| tech_thread_type | Self Tapping (ST) |
|---|---|
| tech_head_style | Wafer Head |
| tech_drive_type | Phillips PH2 |
| tech_length | 25mm |
| tech_diameter | 4.2mm |
| tech_material | BZP Steel |
| tech_coating | Premium powder coat |
| tech_ral_code | RAL 6012 |
| tech_ral_name | Black Green |
| tech_colour_system | RAL Classic |
The 25mm companion to PanelPro™ HP19, engineered for fixing printed hoarding panels and ACM graphic boards to timber and light-gauge steel framing where extra length is needed - thicker or multi-layer panel build-ups, deeper embedment into softer timber, and hoardings under higher wind load. The low-profile wafer head and colour-matched powder coat keep fixings discreet against printed graphics.
The additional 6mm of thread over HP19 increases withdrawal resistance where panels are exposed to greater wind uplift or fixed at wider centres. Use with a variable-speed driver and PH2 bit. Avoid overdriving.
Fixing schedules for wind-loaded hoardings should be confirmed by the temporary works designer. For fixing panels to metal framework, use PanelPro™ HP25-SD self-drilling screws.
Loading delivery information...