PanelPro™ HP25 Hoarding Screws - 25mm - RAL 5024 Pastel Blue
Available in 40 colours
PanelPro™ HP25-SD in RAL 5024 Pastel Blue is a 25mm self-drilling hoarding screw that fixes printed panels and ACM graphics straight to metal framework - drilling its own hole and forming the thread in a single pass through sheet metal up to 3mm, with no pre-drilling.
Unlike generic self-drillers, PanelPro™ pairs the drill point with a low-profile colour-matched head, so visible fixings disappear into printed graphics on metal-framed hoardings.
For timber frames use the self-tapping PanelPro™ HP19 19mm hoarding screw in RAL 5024 Pastel Blue or the longer HP25 25mm screw; HP25-SD is the metal-frame member of the same colour-matched system.
Drill at speed and ease off as the wafer head seats to avoid stripping the metal thread, and brush away swarf immediately to protect the powder-coated finish. Maximum metal thickness 3mm - pre-drill thicker sections.
In RAL 5024 Pastel Blue - a soft sky blue for healthcare, education and residential hoardings - the colour-matched wafer head disappears into the panel face, avoiding the spotted look of bright zinc or mismatched fixings.
PanelPro™ HP25-SD is available in 40 colour-matched RAL finishes, held in stock for rapid dispatch so contractors and procurement teams can source consistent fixings across full and multi-site installations.
PanelPro™ HP25-SD is suitable for:
Typical fixing centres: 300mm - 450mm (subject to panel size and wind loading).
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Self-Tapping |
| Point Type | Self-Drilling |
| Max Drilling Thickness | 3.0mm |
| Substrate | Thin Sheet Metal |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Zinc Plated) |
| Head Finish | Powder Coated RAL 5024 Pastel Blue |
| Standard | BS EN 14566 / BS EN 10666 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP25-SD technical specification.
No. PanelPro™ HP25-SD drills its own hole and forms the thread in one pass through sheet metal up to 3mm. Beyond 3mm, pre-drill the section first.
Metal framework - proprietary steel and aluminium hoarding systems, steel track and stud, aluminium sub-frames and box frames - up to 3mm thick. For timber frames, use the self-tapping HP19 or HP25 instead.
Yes. The powder-coated wafer head is colour matched to industry-standard RAL 5024 Pastel Blue so fixings sit discreetly against printed graphics.
We hold stock across all 40 colours for quick next-day despatch on a tracked 24 service. Bulk or bespoke colour orders usually take around 3 - 5 working days.
We coat these screws in-house rather than buying in pre-painted fixings, giving tight control over the RAL match and a harder, longer-lasting finish.
Powder coating electrostatically applies coloured powder to the fixing before curing it at high temperature, creating a hard, uniform layer that significantly outperforms painted finishes - durable, colourfast and built for site.
Benefits of powder coated self-drilling screws:
PanelPro™ self-drilling hoarding screws are available in 40 colour-matched RAL finishes to align with printed hoarding graphics and panel systems.
Match the point type to the frame and the length to the build-up:
| tech_thread_type | Self Drilling (SD) |
|---|---|
| tech_head_style | Wafer Head |
| tech_drive_type | Phillips PH2 |
| tech_length | 25mm |
| tech_diameter | 4.2mm |
| tech_material | BZP Steel |
| tech_coating | Premium powder coat |
| tech_ral_code | RAL 5024 |
| tech_ral_name | Pastel Blue |
| tech_colour_system | RAL Classic |
The self-drilling member of the PanelPro™ range, engineered for fixing printed hoarding panels, ACM graphic boards and composite panels directly to metal framework. The self-drilling point bores its own hole and forms the thread in a single pass through sheet metal up to 3mm - no pre-drilling - while the low-profile colour-matched wafer head keeps fixings discreet against printed graphics.
Ideal where hoarding uses proprietary steel or aluminium frames rather than timber, and for stitching light-gauge metal track and stud. Drill at speed and ease off as the head seats; brush away swarf immediately to protect the powder-coated finish. Use with a variable-speed driver and PH2 bit.
Maximum metal thickness 3mm - pre-drill thicker sections. For fixing to timber frames, use PanelPro™ HP19 or HP25 self-tapping screws.
Loading delivery information...