PanelPro™ HP25 Hoarding Screws - 25mm - RAL 7016 Anthracite Grey
Available in 40 colours
The self-drilling member of the PanelPro™ range, HP25-SD in RAL 7016 Anthracite Grey is built for metal-framed hoardings: a colour-matched wafer head screw that bores through steel or aluminium up to 3mm and holds panels fast without a pilot hole.
One pass drills the metal and forms the thread, giving a clean, consistent fix on proprietary steel hoarding systems, aluminium sub-frames and drywall track.
HP25-SD completes the PanelPro™ system alongside the PanelPro™ HP19 19mm hoarding screw in RAL 7016 Anthracite Grey and the HP25 25mm screw - match the self-drilling point to metal frames and the self-tapping points to timber, all in the same RAL finish.
Drill at speed and ease off as the wafer head seats to avoid stripping the metal thread, and brush away swarf immediately to protect the powder-coated finish. Maximum metal thickness 3mm - pre-drill thicker sections.
The RAL 7016 Anthracite Grey head - a dark architectural grey, the top-selling contemporary neutral - is powder coated in-house to the exact RAL reference so it aligns precisely with panels and trims specified in the same colour.
PanelPro™ HP25-SD is available in 40 colour-matched RAL finishes, held in stock for rapid dispatch so contractors and procurement teams can source consistent fixings across full and multi-site installations.
PanelPro™ HP25-SD is suitable for:
Typical fixing centres: 300mm - 450mm (subject to panel size and wind loading).
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Self-Tapping |
| Point Type | Self-Drilling |
| Max Drilling Thickness | 3.0mm |
| Substrate | Thin Sheet Metal |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Zinc Plated) |
| Head Finish | Powder Coated RAL 7016 Anthracite Grey |
| Standard | BS EN 14566 / BS EN 10666 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP25-SD technical specification.
No. PanelPro™ HP25-SD drills its own hole and forms the thread in one pass through sheet metal up to 3mm. Beyond 3mm, pre-drill the section first.
Metal framework - proprietary steel and aluminium hoarding systems, steel track and stud, aluminium sub-frames and box frames - up to 3mm thick. For timber frames, use the self-tapping HP19 or HP25 instead.
Yes. The powder-coated wafer head is colour matched to industry-standard RAL 7016 Anthracite Grey so fixings sit discreetly against printed graphics.
We hold stock across all 40 colours for quick next-day despatch on a tracked 24 service. Bulk or bespoke colour orders usually take around 3 - 5 working days.
At RALfixings we powder coat every coloured hoarding screw in-house to exact RAL specifications, because the smallest details make the biggest difference on a finished hoarding.
Powder coating electrostatically applies coloured powder to the fixing before curing it at high temperature, creating a hard, uniform layer that significantly outperforms painted finishes - durable, colourfast and built for site.
Benefits of powder coated self-drilling screws:
PanelPro™ self-drilling hoarding screws are available in 40 colour-matched RAL finishes to align with printed hoarding graphics and panel systems.
Match the point type to the frame and the length to the build-up:
| tech_thread_type | Self Drilling (SD) |
|---|---|
| tech_head_style | Wafer Head |
| tech_drive_type | Phillips PH2 |
| tech_length | 25mm |
| tech_diameter | 4.2mm |
| tech_material | BZP Steel |
| tech_coating | Premium powder coat |
| tech_ral_code | RAL 7016 |
| tech_ral_name | Anthracite Grey |
| tech_colour_system | RAL Classic |
The self-drilling member of the PanelPro™ range, engineered for fixing printed hoarding panels, ACM graphic boards and composite panels directly to metal framework. The self-drilling point bores its own hole and forms the thread in a single pass through sheet metal up to 3mm - no pre-drilling - while the low-profile colour-matched wafer head keeps fixings discreet against printed graphics.
Ideal where hoarding uses proprietary steel or aluminium frames rather than timber, and for stitching light-gauge metal track and stud. Drill at speed and ease off as the head seats; brush away swarf immediately to protect the powder-coated finish. Use with a variable-speed driver and PH2 bit.
Maximum metal thickness 3mm - pre-drill thicker sections. For fixing to timber frames, use PanelPro™ HP19 or HP25 self-tapping screws.
Loading delivery information...