Description
Grey beige is a warm, muted neutral that sits at the softer end of the architectural palette. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1019 Grey Beige are powder coated to match the understated, sand-influenced tone used across contemporary cladding rail systems, light steel framing and architectural metalwork where a refined, warm neutral has been specified on the face of the structure. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and restraint.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork and sheet metal fabrication in grey beige colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1019 Grey Beige
RAL 1019 Grey Beige is a mid-tone neutral sitting between beige and grey, with a warm sandy undertone that gives it a natural, composed character. On steel structures and cladding rail systems, this colour appears where a warm, recessive neutral has been chosen as an alternative to the cool greys that dominate standard steel finish specifications. It sits naturally alongside natural material cladding, rendered facades and contemporary architectural metalwork in earth-toned palettes.
The warm sandy undertone in grey beige is what makes a standard grey or zinc fixing unreliable on this colour. A cool grey hex head reads as a noticeably different tone against a surface with warmth in it, and a zinc head introduces a metallic brightness that sits at odds with the quiet, composed character of RAL 1019. Each bolt head is powder coated to the exact RAL 1019 Classic standard, producing a head that carries the same warm, neutral quality as the steel surface it sits on.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1019 Grey Beige hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a warm grey-beige colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in grey beige or warm sandy neutral
- Metal roofing sheets, flashings and roof structure connections in warm neutral colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1019
- Architectural metalwork and exposed steel structures in contemporary earth-toned palettes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
How does RAL 1019 Grey Beige differ from RAL 7032 Pebble Grey and RAL 7038 Agate Grey on steel structures?
RAL 7032 Pebble Grey is a warmer, more clearly grey-influenced tone with a mineral, stone-like quality and more depth than RAL 1019. RAL 7038 Agate Grey is a balanced light grey with a slight warmth but considerably more grey character than RAL 1019. RAL 1019 Grey Beige sits between beige and grey, with a sandy warmth that gives it a softer, more neutral quality than either. If your steel structure reads as a warm mid-tone neutral sitting closer to sand than to stone grey, RAL 1019 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1019 Grey Beige is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Description
Grey beige is a warm, muted neutral that sits at the softer end of the architectural palette. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1019 Grey Beige are powder coated to match the understated, sand-influenced tone used across contemporary cladding rail systems, light steel framing and architectural metalwork where a refined, warm neutral has been specified on the face of the structure. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and restraint.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork and sheet metal fabrication in grey beige colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1019 Grey Beige
RAL 1019 Grey Beige is a mid-tone neutral sitting between beige and grey, with a warm sandy undertone that gives it a natural, composed character. On steel structures and cladding rail systems, this colour appears where a warm, recessive neutral has been chosen as an alternative to the cool greys that dominate standard steel finish specifications. It sits naturally alongside natural material cladding, rendered facades and contemporary architectural metalwork in earth-toned palettes.
The warm sandy undertone in grey beige is what makes a standard grey or zinc fixing unreliable on this colour. A cool grey hex head reads as a noticeably different tone against a surface with warmth in it, and a zinc head introduces a metallic brightness that sits at odds with the quiet, composed character of RAL 1019. Each bolt head is powder coated to the exact RAL 1019 Classic standard, producing a head that carries the same warm, neutral quality as the steel surface it sits on.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1019 Grey Beige hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a warm grey-beige colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in grey beige or warm sandy neutral
- Metal roofing sheets, flashings and roof structure connections in warm neutral colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1019
- Architectural metalwork and exposed steel structures in contemporary earth-toned palettes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
How does RAL 1019 Grey Beige differ from RAL 7032 Pebble Grey and RAL 7038 Agate Grey on steel structures?
RAL 7032 Pebble Grey is a warmer, more clearly grey-influenced tone with a mineral, stone-like quality and more depth than RAL 1019. RAL 7038 Agate Grey is a balanced light grey with a slight warmth but considerably more grey character than RAL 1019. RAL 1019 Grey Beige sits between beige and grey, with a sandy warmth that gives it a softer, more neutral quality than either. If your steel structure reads as a warm mid-tone neutral sitting closer to sand than to stone grey, RAL 1019 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1019 Grey Beige is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Grey beige is a warm, muted neutral that sits at the softer end of the architectural palette. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1019 Grey Beige are powder coated to match the understated, sand-influenced tone used across contemporary cladding rail systems, light steel framing and architectural metalwork where a refined, warm neutral has been specified on the face of the structure. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and restraint.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork and sheet metal fabrication in grey beige colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1019 Grey Beige
RAL 1019 Grey Beige is a mid-tone neutral sitting between beige and grey, with a warm sandy undertone that gives it a natural, composed character. On steel structures and cladding rail systems, this colour appears where a warm, recessive neutral has been chosen as an alternative to the cool greys that dominate standard steel finish specifications. It sits naturally alongside natural material cladding, rendered facades and contemporary architectural metalwork in earth-toned palettes.
The warm sandy undertone in grey beige is what makes a standard grey or zinc fixing unreliable on this colour. A cool grey hex head reads as a noticeably different tone against a surface with warmth in it, and a zinc head introduces a metallic brightness that sits at odds with the quiet, composed character of RAL 1019. Each bolt head is powder coated to the exact RAL 1019 Classic standard, producing a head that carries the same warm, neutral quality as the steel surface it sits on.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1019 Grey Beige hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a warm grey-beige colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in grey beige or warm sandy neutral
- Metal roofing sheets, flashings and roof structure connections in warm neutral colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1019
- Architectural metalwork and exposed steel structures in contemporary earth-toned palettes
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
How does RAL 1019 Grey Beige differ from RAL 7032 Pebble Grey and RAL 7038 Agate Grey on steel structures?
RAL 7032 Pebble Grey is a warmer, more clearly grey-influenced tone with a mineral, stone-like quality and more depth than RAL 1019. RAL 7038 Agate Grey is a balanced light grey with a slight warmth but considerably more grey character than RAL 1019. RAL 1019 Grey Beige sits between beige and grey, with a sandy warmth that gives it a softer, more neutral quality than either. If your steel structure reads as a warm mid-tone neutral sitting closer to sand than to stone grey, RAL 1019 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1019 Grey Beige is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Recommended applications
Designed for fixing cladding rails, purlins, and light steel framing to structural steel substrates. The powder-coated hex head matches your panel or cladding RAL precisely, eliminating visible bright metal fixings on exposed metalwork. The self-drilling point removes the need for pre-drilling in light gauge steel.
At 13mm, these bolts are ideal for thin sheet metal connections and light-gauge steel framing where a short fixing length is required. The 1/4" hex drive (6.35mm) is compatible with standard impact drivers and hex socket nut runners.
Not recommended for timber or plastic substrates — use our flange head self tapping range for non-steel applications.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
