RAL 1019 Grey Beige - 19mm x 4.2mm Painted Wafer Head Self Tapping Screws - BZP Steel
Available in 40 colours
Our powder coated 19mm × 4.2mm wafer head self drilling screws are the standard stitching length for fast, reliable fixing into light-gauge steel, sheet metal and framing. Engineered for professional trade use, these screws deliver excellent pull-up, clean penetration and a discreet finished appearance, all without the need for pre-drilling.
The integrated self-drilling point is capable of penetrating steel up to 3.0mm, making this size ideal for fixing through sheet materials, folded steel, aluminium sections and light framing. The 19mm length gives full thread engagement into light-gauge steel while keeping protrusion behind the substrate to a minimum, and the 4.2mm thread offers a balanced combination of holding strength and ease of installation.
The wafer low-profile head distributes load across a wider surface area than traditional pan or countersunk heads, reducing the risk of pull-through on thin materials and helping the fixing sit flatter against the finished surface. This makes the 19mm wafer head self driller a go-to choice for signage systems, hoarding panels, framing, ducting, cable containment and light cladding applications where appearance and performance matter equally.
All screws are powder coated to order in any RAL Classic colour, allowing installers, fabricators and contractors to colour-match fixings to panels, trims, graphics or corporate branding, delivering a cleaner, more professional finished installation.
RAL 1019 Grey Beige blends soft grey with warm beige undertones for a neutral, architectural finish. It’s ideal for 19mm wafer head self-drilling screws on cladding and hoarding where you want the fixings to visually disappear.
These 19mm powder coated wafer head self drilling screws are widely used by signage installers, hoarding contractors, steel framers, shop fitters, M&E installers and fabricators who require a dependable fixing for light-to-medium duty applications where aesthetics are still important.
Compared to longer 25mm and 32mm fixings, the 19mm length keeps protrusion behind the steel to a minimum – ideal for stud-to-track stitching and sheet fixing where a longer shank gains nothing and risks fouling services, boards or moving parts behind the substrate. The slimmer 4.2mm diameter allows for faster driving, reduced material stress and cleaner results in thin substrates, particularly useful when installing at speed or close to panel edges.
Our precision powder-coating process fuses colour at high temperature, producing a hard-wearing, corrosion-resistant finish that stands up to outdoor exposure, repeated handling and long-term use on site.
They’re the standard stitching length for joining metal stud to track, stitching overlapping sheet metal, and fixing signage, hoarding, cladding and ducting to light steel – anywhere a low-profile head and minimal protrusion behind the substrate matter more than extra reach.
The self-drilling point is designed to drill and tap steel up to 3.0mm thick, as well as aluminium and other light-gauge metals, without the need for a pilot hole.
Choose 19mm when the fixed material sits tight to the steel and you want the shortest shank that still gives full thread engagement – stud-to-track, sheet stitching and panel fixing. Step up to 25mm only where layered materials, insulation backing or deeper sections put the steel further from the head. The 4.2mm diameter drives quicker with less material stress than heavier 4.8mm screws.
Yes. We powder coat these screws to any RAL Classic colour, with fast turnaround and bulk discounts available for trade and large-scale projects.
Here at RALfixings, we believe it’s the small details that elevate a professional installation. That’s why we powder coat all our coloured wafer head screws in-house to exact RAL specifications.
Powder coating involves electrostatically applying coloured powder to the fixing before curing it at high temperature, creating a tough, uniform finish that outperforms traditional painted coatings. The result is a durable, colourfast surface designed to withstand site handling and long-term exposure.
| tech_thread_type | Self Drilling (SD) |
|---|---|
| tech_head_style | Wafer Head |
| tech_drive_type | Phillips PH2 |
| tech_length | 19mm |
| tech_diameter | 4.2mm |
| tech_gauge | #8 |
| tech_point_type | Self-drilling drill point |
| tech_steel_capacity | Up to 3.0mm light gauge steel |
| tech_material | BZP Steel |
| tech_coating | Premium powder coat |
| tech_ral_code | RAL 1019 |
| tech_ral_name | Grey Beige |
| tech_colour_system | RAL Classic |
Engineered for stitching light-gauge metal framing systems and fixing thin sheet metal without pre-drilling. The self-drilling point cuts its own hole through steel up to 3.0mm, while the wide, low-profile wafer head spreads clamping load and sits flush so it will not foul boards, panels or moving parts fitted over it.
Widely used by drylining and partition contractors for joining metal stud to track before boarding, and by signage and fit-out teams fixing panels directly to steel subframes. Drive with a variable-speed driver and a PH2 bit; let the drill point do the work and avoid overdriving, which can strip the thread in thin gauge steel.
For fixing into timber or pre-drilled substrates where a drill point is not required, see the wafer head self-tapping range.
Loading delivery information...