Coloured 19mm x 4.2mm Flange Head Self-Tapping Screws
These 19 x 4.2mm coloured flange head self-tapping screws are a long-standing industry standard across the signage, hoarding, and fit-out trades. The integrated flange head acts like a built-in washer - spreading the clamping load across a wider area than a standard pan head, reducing pull-through risk on thin panels, and providing additional tolerance on pre-drilled holes. It is the go-to fixing wherever visible screws need to hold securely and look clean.
The sharp self-tapping point forms its own thread on entry into metal and plastic substrates without the need for pre-tapped holes. The 19mm length and 4.2mm diameter provide the right balance of holding power and fast installation for fixing hoarding panels, signage systems, trims, folded aluminium, PVC, and composite sheet into light-gauge steel or plastic frameworks - by hand or at scale with an impact driver.
Manufactured from carbon steel with a bright zinc plated (BZP) base, each screw is powder-coated in-house to a RAL Classic colour standard. Where the screw head sits against printed hoarding graphics, branded fascias, or colour-specified trims, an uncoated zinc fixing breaks the finish. A colour-matched flange head disappears into the panel, delivering the clean, uniform appearance that specifiers and end clients expect.
41 RAL Colour-Matched Finishes
Every 4.2 x 19mm flange head screw is electrostatically powder-coated and oven-cured to a RAL Classic colour standard. The result is a hard, uniform finish bonded directly to the screw head and flange - resistant to scratching, chipping, UV fading, and general site wear. Unlike wet paint, powder coat will not peel, blister, or thin at edges over time, even on temporary hoarding installations where panels are fitted and removed repeatedly.
With 41 stocked RAL colours spanning whites, greys, blacks, blues, greens, reds, yellows, browns, and purples, these coloured flange head screws cover the most commonly specified colours across signage, hoarding, shopfitting, and cladding applications. Whether you are matching RAL 9005 Jet Black hoarding panels, RAL 7016 Anthracite Grey aluminium trims, RAL 9010 Pure White shopfront fascias, or RAL 5012 Light Blue branded graphics, the right colour is available for immediate dispatch.
Need a RAL colour outside the stocked range? We hold over 400 RAL Classic powders and can coat to any colour on request. Contact us with your RAL reference for availability and lead times.
Common Applications
4.2 x 19mm coloured flange head self-tapping screws are used wherever a strong, colour-matched clamping fix into metal or plastic is required:
- Hoarding panels - construction site perimeter hoardings, branded graphics boards
- Signage - sign trays, fascia frames, illuminated sign boxes, and channel letter mounting
- Shopfitting and retail fit-out - display systems, feature walls, and internal trims
- Cladding trims and flashings - aluminium copings, PVC cover strips, and decorative sections
- Façade elements - panel clips, trim fixings, and external feature details
- Temporary and semi-permanent installations - exhibition stands, event hoardings, and site signage
Specification
| Size | 4.2 x 19mm |
| Thread Diameter | 4.2mm |
| Length | 19mm |
| Head Type | Flange head (integrated washer) |
| Recess Type | Pozidriv (PZ2) |
| Thread Type | Self-tapping |
| Point Type | Sharp point (thread forming) |
| Material | Carbon steel |
| Base Finish | Bright Zinc Plated (BZP) |
| Coating | RAL Classic powder coat (electrostatic, oven-cured) |
| Substrates | Light-gauge steel, aluminium, PVC, plastics, composite sheet |
| Colours Available | 41 stocked RAL colours (any RAL Classic on request) |
Frequently Asked Questions
What is a flange head screw?
A flange head screw has an integrated washer built into the underside of the head. This wider bearing surface spreads the clamping load across a larger area than a standard pan or countersunk head, reducing the risk of pull-through on thin panels and minimising surface deformation. It also provides additional tolerance on pre-drilled holes, making flange head screws a practical choice for hoarding, signage, and cladding installations where panels may be fitted and removed.
What is the difference between a self-tapping and a self-drilling screw?
A self-tapping screw forms its own thread as it is driven into a pre-formed or pre-drilled hole — it does not need a pre-cut thread but does need a hole to start in. A self-drilling screw has an integrated drill point (Tek point) that cuts its own hole into the substrate before the thread engages, so no pilot hole is required. These 4.2 x 19mm flange head screws are self-tapping: they form their thread on entry but require a pre-drilled or pre-punched hole in harder metals.
What driver bit do I need for these screws?
These flange head screws have a Pozidriv PZ2 recess. Use a standard PZ2 driver bit - compatible with all cordless drivers and hand screwdrivers. Apply firm, steady pressure for a positive drive.
Do I need to pre-drill before using these screws?
In softer materials such as plastics, PVC, and thinner metals, pre-drilling is usually not required - the sharp self-tapping point forms its own thread on entry. For harder metals or repeat installations where panels are fitted and removed periodically, a pilot hole improves consistency and reduces the risk of cross-threading.
What RAL colours are available for these flange head screws?
These 4.2 x 19mm flange head self-tapping screws are stocked in 41 RAL Classic colours covering whites, greys, blacks, blues, greens, reds, yellows, browns, and purples. If you need a colour outside this range, contact us - we hold over 400 RAL Classic powders and can coat to any colour on request.
Powder Coated Self-Tapping Screws
RALfixings specialise in colour-matched visible fixings for the signage, hoarding, and construction sectors. Every self-tapping screw is powder-coated in-house using an electrostatic spray process, then oven-cured at 200°C to produce a hard, even finish that bonds directly to the screw head and flange.
Powder coating outperforms wet paint in every measurable way. The electrostatically charged powder particles wrap around the flange edge and into the Pozidriv recess, building a consistent film thickness that liquid paint cannot replicate. On a flange head screw - where the wide bearing surface is visible against the panel - this coverage matters. The cured finish is harder, more flexible, and far more resistant to impact, abrasion, and chemical exposure than paint, lasting years beyond a conventional painted finish even on temporary installations subject to repeated fitting and removal.
Benefits of powder coated self-tapping screws:
- Scratch resistant - hard cured finish withstands handling, installation, and panel changes
- Rust resistant - BZP base plus powder coat provides dual corrosion protection
- UV resistant - colour stays true with no fading or chalking
- Weather resistant - will not peel, blister, or crack in exterior conditions
- Colourfast - RAL colour-matched finish maintains consistency over time
Available RAL Colours
19mm x 4.2mm coloured flange head self-tapping screws are stocked in the following 41 RAL Classic colours. Select your colour from the dropdown above, or view the full RALfixings colour guide for additional RAL colours available on request.
- RAL 1013 Oyster White
- RAL 1015 Light Ivory
- RAL 1016 Sulphur Yellow
- RAL 1019 Grey Beige
- RAL 1020 Olive Yellow
- RAL 1023 Traffic Yellow
- RAL 1033 Dahlia Yellow
- RAL 1036 Pearl Gold
- RAL 3002 Carmine Red
- RAL 3004 Purple Red
- RAL 3009 Oxide Red
- RAL 3020 Traffic Red
- RAL 4006 Traffic Purple
- RAL 4007 Violet Purple
- RAL 4010 Telemagenta
- RAL 5003 Sapphire Blue
- RAL 5004 Black Blue
- RAL 5012 Light Blue
- RAL 5013 Cobalt Blue
- RAL 5023 Distant Blue
- RAL 5024 Pastel Blue
- RAL 6003 Olive Green
- RAL 6005 Moss Green
- RAL 6009 Fir Green
- RAL 6012 Black Green
- RAL 6016 Turquoise Green
- RAL 6024 Traffic Green
- RAL 6025 Fern Green
- RAL 6027 Light Green
- RAL 7009 Green Grey
- RAL 7016 Anthracite Grey
- RAL 7032 Pebble Grey
- RAL 7035 Light Grey
- RAL 7038 Agate Grey
- RAL 7042 Traffic Grey A
- RAL 8004 Copper Brown
- RAL 8008 Olive Brown
- RAL 8019 Grey Brown
- RAL 9005 Jet Black
- RAL 9010 Pure White
- RAL 9016 Traffic White
Related Products
Coloured 19mm x 4.2mm Flange Head Self-Tapping Screws
These 19 x 4.2mm coloured flange head self-tapping screws are a long-standing industry standard across the signage, hoarding, and fit-out trades. The integrated flange head acts like a built-in washer - spreading the clamping load across a wider area than a standard pan head, reducing pull-through risk on thin panels, and providing additional tolerance on pre-drilled holes. It is the go-to fixing wherever visible screws need to hold securely and look clean.
The sharp self-tapping point forms its own thread on entry into metal and plastic substrates without the need for pre-tapped holes. The 19mm length and 4.2mm diameter provide the right balance of holding power and fast installation for fixing hoarding panels, signage systems, trims, folded aluminium, PVC, and composite sheet into light-gauge steel or plastic frameworks - by hand or at scale with an impact driver.
Manufactured from carbon steel with a bright zinc plated (BZP) base, each screw is powder-coated in-house to a RAL Classic colour standard. Where the screw head sits against printed hoarding graphics, branded fascias, or colour-specified trims, an uncoated zinc fixing breaks the finish. A colour-matched flange head disappears into the panel, delivering the clean, uniform appearance that specifiers and end clients expect.
41 RAL Colour-Matched Finishes
Every 4.2 x 19mm flange head screw is electrostatically powder-coated and oven-cured to a RAL Classic colour standard. The result is a hard, uniform finish bonded directly to the screw head and flange - resistant to scratching, chipping, UV fading, and general site wear. Unlike wet paint, powder coat will not peel, blister, or thin at edges over time, even on temporary hoarding installations where panels are fitted and removed repeatedly.
With 41 stocked RAL colours spanning whites, greys, blacks, blues, greens, reds, yellows, browns, and purples, these coloured flange head screws cover the most commonly specified colours across signage, hoarding, shopfitting, and cladding applications. Whether you are matching RAL 9005 Jet Black hoarding panels, RAL 7016 Anthracite Grey aluminium trims, RAL 9010 Pure White shopfront fascias, or RAL 5012 Light Blue branded graphics, the right colour is available for immediate dispatch.
Need a RAL colour outside the stocked range? We hold over 400 RAL Classic powders and can coat to any colour on request. Contact us with your RAL reference for availability and lead times.
Common Applications
4.2 x 19mm coloured flange head self-tapping screws are used wherever a strong, colour-matched clamping fix into metal or plastic is required:
- Hoarding panels - construction site perimeter hoardings, branded graphics boards
- Signage - sign trays, fascia frames, illuminated sign boxes, and channel letter mounting
- Shopfitting and retail fit-out - display systems, feature walls, and internal trims
- Cladding trims and flashings - aluminium copings, PVC cover strips, and decorative sections
- Façade elements - panel clips, trim fixings, and external feature details
- Temporary and semi-permanent installations - exhibition stands, event hoardings, and site signage
Specification
| Size | 4.2 x 19mm |
| Thread Diameter | 4.2mm |
| Length | 19mm |
| Head Type | Flange head (integrated washer) |
| Recess Type | Pozidriv (PZ2) |
| Thread Type | Self-tapping |
| Point Type | Sharp point (thread forming) |
| Material | Carbon steel |
| Base Finish | Bright Zinc Plated (BZP) |
| Coating | RAL Classic powder coat (electrostatic, oven-cured) |
| Substrates | Light-gauge steel, aluminium, PVC, plastics, composite sheet |
| Colours Available | 41 stocked RAL colours (any RAL Classic on request) |
Frequently Asked Questions
What is a flange head screw?
A flange head screw has an integrated washer built into the underside of the head. This wider bearing surface spreads the clamping load across a larger area than a standard pan or countersunk head, reducing the risk of pull-through on thin panels and minimising surface deformation. It also provides additional tolerance on pre-drilled holes, making flange head screws a practical choice for hoarding, signage, and cladding installations where panels may be fitted and removed.
What is the difference between a self-tapping and a self-drilling screw?
A self-tapping screw forms its own thread as it is driven into a pre-formed or pre-drilled hole — it does not need a pre-cut thread but does need a hole to start in. A self-drilling screw has an integrated drill point (Tek point) that cuts its own hole into the substrate before the thread engages, so no pilot hole is required. These 4.2 x 19mm flange head screws are self-tapping: they form their thread on entry but require a pre-drilled or pre-punched hole in harder metals.
What driver bit do I need for these screws?
These flange head screws have a Pozidriv PZ2 recess. Use a standard PZ2 driver bit - compatible with all cordless drivers and hand screwdrivers. Apply firm, steady pressure for a positive drive.
Do I need to pre-drill before using these screws?
In softer materials such as plastics, PVC, and thinner metals, pre-drilling is usually not required - the sharp self-tapping point forms its own thread on entry. For harder metals or repeat installations where panels are fitted and removed periodically, a pilot hole improves consistency and reduces the risk of cross-threading.
What RAL colours are available for these flange head screws?
These 4.2 x 19mm flange head self-tapping screws are stocked in 41 RAL Classic colours covering whites, greys, blacks, blues, greens, reds, yellows, browns, and purples. If you need a colour outside this range, contact us - we hold over 400 RAL Classic powders and can coat to any colour on request.
Powder Coated Self-Tapping Screws
RALfixings specialise in colour-matched visible fixings for the signage, hoarding, and construction sectors. Every self-tapping screw is powder-coated in-house using an electrostatic spray process, then oven-cured at 200°C to produce a hard, even finish that bonds directly to the screw head and flange.
Powder coating outperforms wet paint in every measurable way. The electrostatically charged powder particles wrap around the flange edge and into the Pozidriv recess, building a consistent film thickness that liquid paint cannot replicate. On a flange head screw - where the wide bearing surface is visible against the panel - this coverage matters. The cured finish is harder, more flexible, and far more resistant to impact, abrasion, and chemical exposure than paint, lasting years beyond a conventional painted finish even on temporary installations subject to repeated fitting and removal.
Benefits of powder coated self-tapping screws:
- Scratch resistant - hard cured finish withstands handling, installation, and panel changes
- Rust resistant - BZP base plus powder coat provides dual corrosion protection
- UV resistant - colour stays true with no fading or chalking
- Weather resistant - will not peel, blister, or crack in exterior conditions
- Colourfast - RAL colour-matched finish maintains consistency over time
Available RAL Colours
19mm x 4.2mm coloured flange head self-tapping screws are stocked in the following 41 RAL Classic colours. Select your colour from the dropdown above, or view the full RALfixings colour guide for additional RAL colours available on request.
- RAL 1013 Oyster White
- RAL 1015 Light Ivory
- RAL 1016 Sulphur Yellow
- RAL 1019 Grey Beige
- RAL 1020 Olive Yellow
- RAL 1023 Traffic Yellow
- RAL 1033 Dahlia Yellow
- RAL 1036 Pearl Gold
- RAL 3002 Carmine Red
- RAL 3004 Purple Red
- RAL 3009 Oxide Red
- RAL 3020 Traffic Red
- RAL 4006 Traffic Purple
- RAL 4007 Violet Purple
- RAL 4010 Telemagenta
- RAL 5003 Sapphire Blue
- RAL 5004 Black Blue
- RAL 5012 Light Blue
- RAL 5013 Cobalt Blue
- RAL 5023 Distant Blue
- RAL 5024 Pastel Blue
- RAL 6003 Olive Green
- RAL 6005 Moss Green
- RAL 6009 Fir Green
- RAL 6012 Black Green
- RAL 6016 Turquoise Green
- RAL 6024 Traffic Green
- RAL 6025 Fern Green
- RAL 6027 Light Green
- RAL 7009 Green Grey
- RAL 7016 Anthracite Grey
- RAL 7032 Pebble Grey
- RAL 7035 Light Grey
- RAL 7038 Agate Grey
- RAL 7042 Traffic Grey A
- RAL 8004 Copper Brown
- RAL 8008 Olive Brown
- RAL 8019 Grey Brown
- RAL 9005 Jet Black
- RAL 9010 Pure White
- RAL 9016 Traffic White
Related Products
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
What our customers say
Posted by john pepper on 23rd Jul 2026
Ordered up some colour headed screws, they arrived quickly well packed. The head finish is spot on and they are easily the better of the types i've brought previously
Posted by D H Spinner on 22nd Apr 2025
Used 19mm screws in black to put up some black panelling. Nice and simple to order, arrived quick, hard to go wrong!
Posted by Patrick Ward on 14th Jun 2024
Great service, had been looking for a specific RAL coloured screws, for a current project and this was the only place that could accommodate. Great service and nothing was the problem. Will definitely be using them again ?
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Coloured 19mm x 4.2mm Flange Head Self-Tapping Screws
These 19 x 4.2mm coloured flange head self-tapping screws are a long-standing industry standard across the signage, hoarding, and fit-out trades. The integrated flange head acts like a built-in washer - spreading the clamping load across a wider area than a standard pan head, reducing pull-through risk on thin panels, and providing additional tolerance on pre-drilled holes. It is the go-to fixing wherever visible screws need to hold securely and look clean.
The sharp self-tapping point forms its own thread on entry into metal and plastic substrates without the need for pre-tapped holes. The 19mm length and 4.2mm diameter provide the right balance of holding power and fast installation for fixing hoarding panels, signage systems, trims, folded aluminium, PVC, and composite sheet into light-gauge steel or plastic frameworks - by hand or at scale with an impact driver.
Manufactured from carbon steel with a bright zinc plated (BZP) base, each screw is powder-coated in-house to a RAL Classic colour standard. Where the screw head sits against printed hoarding graphics, branded fascias, or colour-specified trims, an uncoated zinc fixing breaks the finish. A colour-matched flange head disappears into the panel, delivering the clean, uniform appearance that specifiers and end clients expect.
41 RAL Colour-Matched Finishes
Every 4.2 x 19mm flange head screw is electrostatically powder-coated and oven-cured to a RAL Classic colour standard. The result is a hard, uniform finish bonded directly to the screw head and flange - resistant to scratching, chipping, UV fading, and general site wear. Unlike wet paint, powder coat will not peel, blister, or thin at edges over time, even on temporary hoarding installations where panels are fitted and removed repeatedly.
With 41 stocked RAL colours spanning whites, greys, blacks, blues, greens, reds, yellows, browns, and purples, these coloured flange head screws cover the most commonly specified colours across signage, hoarding, shopfitting, and cladding applications. Whether you are matching RAL 9005 Jet Black hoarding panels, RAL 7016 Anthracite Grey aluminium trims, RAL 9010 Pure White shopfront fascias, or RAL 5012 Light Blue branded graphics, the right colour is available for immediate dispatch.
Need a RAL colour outside the stocked range? We hold over 400 RAL Classic powders and can coat to any colour on request. Contact us with your RAL reference for availability and lead times.
Common Applications
4.2 x 19mm coloured flange head self-tapping screws are used wherever a strong, colour-matched clamping fix into metal or plastic is required:
- Hoarding panels - construction site perimeter hoardings, branded graphics boards
- Signage - sign trays, fascia frames, illuminated sign boxes, and channel letter mounting
- Shopfitting and retail fit-out - display systems, feature walls, and internal trims
- Cladding trims and flashings - aluminium copings, PVC cover strips, and decorative sections
- Façade elements - panel clips, trim fixings, and external feature details
- Temporary and semi-permanent installations - exhibition stands, event hoardings, and site signage
Specification
| Size | 4.2 x 19mm |
| Thread Diameter | 4.2mm |
| Length | 19mm |
| Head Type | Flange head (integrated washer) |
| Recess Type | Pozidriv (PZ2) |
| Thread Type | Self-tapping |
| Point Type | Sharp point (thread forming) |
| Material | Carbon steel |
| Base Finish | Bright Zinc Plated (BZP) |
| Coating | RAL Classic powder coat (electrostatic, oven-cured) |
| Substrates | Light-gauge steel, aluminium, PVC, plastics, composite sheet |
| Colours Available | 41 stocked RAL colours (any RAL Classic on request) |
Frequently Asked Questions
What is a flange head screw?
A flange head screw has an integrated washer built into the underside of the head. This wider bearing surface spreads the clamping load across a larger area than a standard pan or countersunk head, reducing the risk of pull-through on thin panels and minimising surface deformation. It also provides additional tolerance on pre-drilled holes, making flange head screws a practical choice for hoarding, signage, and cladding installations where panels may be fitted and removed.
What is the difference between a self-tapping and a self-drilling screw?
A self-tapping screw forms its own thread as it is driven into a pre-formed or pre-drilled hole — it does not need a pre-cut thread but does need a hole to start in. A self-drilling screw has an integrated drill point (Tek point) that cuts its own hole into the substrate before the thread engages, so no pilot hole is required. These 4.2 x 19mm flange head screws are self-tapping: they form their thread on entry but require a pre-drilled or pre-punched hole in harder metals.
What driver bit do I need for these screws?
These flange head screws have a Pozidriv PZ2 recess. Use a standard PZ2 driver bit - compatible with all cordless drivers and hand screwdrivers. Apply firm, steady pressure for a positive drive.
Do I need to pre-drill before using these screws?
In softer materials such as plastics, PVC, and thinner metals, pre-drilling is usually not required - the sharp self-tapping point forms its own thread on entry. For harder metals or repeat installations where panels are fitted and removed periodically, a pilot hole improves consistency and reduces the risk of cross-threading.
What RAL colours are available for these flange head screws?
These 4.2 x 19mm flange head self-tapping screws are stocked in 41 RAL Classic colours covering whites, greys, blacks, blues, greens, reds, yellows, browns, and purples. If you need a colour outside this range, contact us - we hold over 400 RAL Classic powders and can coat to any colour on request.
Powder Coated Self-Tapping Screws
RALfixings specialise in colour-matched visible fixings for the signage, hoarding, and construction sectors. Every self-tapping screw is powder-coated in-house using an electrostatic spray process, then oven-cured at 200°C to produce a hard, even finish that bonds directly to the screw head and flange.
Powder coating outperforms wet paint in every measurable way. The electrostatically charged powder particles wrap around the flange edge and into the Pozidriv recess, building a consistent film thickness that liquid paint cannot replicate. On a flange head screw - where the wide bearing surface is visible against the panel - this coverage matters. The cured finish is harder, more flexible, and far more resistant to impact, abrasion, and chemical exposure than paint, lasting years beyond a conventional painted finish even on temporary installations subject to repeated fitting and removal.
Benefits of powder coated self-tapping screws:
- Scratch resistant - hard cured finish withstands handling, installation, and panel changes
- Rust resistant - BZP base plus powder coat provides dual corrosion protection
- UV resistant - colour stays true with no fading or chalking
- Weather resistant - will not peel, blister, or crack in exterior conditions
- Colourfast - RAL colour-matched finish maintains consistency over time
Available RAL Colours
19mm x 4.2mm coloured flange head self-tapping screws are stocked in the following 41 RAL Classic colours. Select your colour from the dropdown above, or view the full RALfixings colour guide for additional RAL colours available on request.
- RAL 1013 Oyster White
- RAL 1015 Light Ivory
- RAL 1016 Sulphur Yellow
- RAL 1019 Grey Beige
- RAL 1020 Olive Yellow
- RAL 1023 Traffic Yellow
- RAL 1033 Dahlia Yellow
- RAL 1036 Pearl Gold
- RAL 3002 Carmine Red
- RAL 3004 Purple Red
- RAL 3009 Oxide Red
- RAL 3020 Traffic Red
- RAL 4006 Traffic Purple
- RAL 4007 Violet Purple
- RAL 4010 Telemagenta
- RAL 5003 Sapphire Blue
- RAL 5004 Black Blue
- RAL 5012 Light Blue
- RAL 5013 Cobalt Blue
- RAL 5023 Distant Blue
- RAL 5024 Pastel Blue
- RAL 6003 Olive Green
- RAL 6005 Moss Green
- RAL 6009 Fir Green
- RAL 6012 Black Green
- RAL 6016 Turquoise Green
- RAL 6024 Traffic Green
- RAL 6025 Fern Green
- RAL 6027 Light Green
- RAL 7009 Green Grey
- RAL 7016 Anthracite Grey
- RAL 7032 Pebble Grey
- RAL 7035 Light Grey
- RAL 7038 Agate Grey
- RAL 7042 Traffic Grey A
- RAL 8004 Copper Brown
- RAL 8008 Olive Brown
- RAL 8019 Grey Brown
- RAL 9005 Jet Black
- RAL 9010 Pure White
- RAL 9016 Traffic White
Related Products
Recommended applications
Designed for fixing ACM panels, composite cladding, and timber facade boards to timber battens and structural substrates. The powder-coated head matches your panel RAL precisely, eliminating visible bright metal fixings against the facade surface.
The 19mm length is ideal for thinner substrates and single-skin applications where a shorter thread engagement is sufficient. Pre-drilling recommended for hardwoods.
Not recommended for fixing into steel framing — use our self-drilling range for steel substrates.
Suitable for
In Stock
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
