PanelPro™ HP25-SD Self-Drilling Screws - 25mm - RAL 6016 Turquoise Green
Available in 40 colours
PanelPro™ HP25 in RAL 6016 Turquoise Green is a 25mm low-profile hoarding screw - the longer companion to our HP19 fixing - developed for printed hoarding panels, ACM (Dibond®) and composite boards where extra thread length is needed to reach through thicker build-ups or hold under higher wind load.
The extra 6mm of thread over HP19 increases withdrawal resistance, giving specifiers more holding capacity where panels are fixed at wider centres or exposed to stronger winds.
For standard single-skin panels the shorter PanelPro™ HP19 19mm hoarding screw in RAL 6016 Turquoise Green remains the go-to; step up to HP25 when build-up thickness or wind exposure demands more thread. Both share the same head and finish for a consistent site appearance.
The fine-thread sharp point drives cleanly into timber and light-gauge steel, while the low-profile powder-coated head ensures a clean, discreet finish across large-format hoarding. Use a variable-speed driver with a PH2 bit and avoid overdriving.
In RAL 6016 Turquoise Green - a vivid blue-green for creative and leisure branding - the colour-matched wafer head disappears into the panel face, avoiding the spotted look of bright zinc or mismatched fixings.
PanelPro™ HP25 is available in 40 colour-matched RAL finishes, held in stock for rapid dispatch so contractors and procurement teams can source consistent fixings across full and multi-site installations.
PanelPro™ HP25 is suitable for:
Typical fixing centres: 300mm - 450mm (subject to panel size and wind loading).
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Head Type | Low Profile Wafer Head |
| Head Diameter | 11mm |
| Thread Type | Fine Thread |
| Point Type | Sharp Point |
| Recess | Phillips PH2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 6016 Turquoise Green |
| Standard | EN 14566 |
| Reaction to Fire | Euroclass A1 |
For full dimensions, installation guidance and compliance information see the PanelPro™ HP25 technical specification.
Step up to HP25 where the panel build-up is thicker, the frame timber is soft, fixing centres are wider, or the hoarding is tall or wind-exposed. The extra 6mm of thread gives greater embedment and withdrawal resistance. For standard single-skin panels, HP19 remains the go-to.
Yes. PanelPro™ HP25 is suitable for external hoarding installations typical of UK construction projects. The powder-coated head is weatherproof, colour-fast and durable.
Yes. The powder-coated head is colour matched to industry-standard RAL 6016 Turquoise Green to help the fixings disappear into the panel for a clean, professional finish.
We hold stock across all 40 colours for quick next-day despatch on a tracked 24 service. Bulk or bespoke colour orders usually take around 3 - 5 working days.
We coat these screws in-house rather than buying in pre-painted fixings, giving tight control over the RAL match and a harder, longer-lasting finish.
Powder coating electrostatically applies coloured powder to the fixing before curing it at high temperature, creating a hard, uniform layer that significantly outperforms painted finishes - durable, colourfast and built for site.
Benefits of powder coated hoarding screws:
PanelPro™ hoarding screws are available in 40 colour-matched RAL finishes to align with printed hoarding graphics and panel systems.
Match the point type to the frame and the length to the build-up:
| tech_thread_type | Self Tapping (ST) |
|---|---|
| tech_head_style | Wafer Head |
| tech_drive_type | Phillips PH2 |
| tech_length | 25mm |
| tech_diameter | 4.2mm |
| tech_material | BZP Steel |
| tech_coating | Premium powder coat |
| tech_ral_code | RAL 6016 |
| tech_ral_name | Turquoise Green |
| tech_colour_system | RAL Classic |
The 25mm companion to PanelPro™ HP19, engineered for fixing printed hoarding panels and ACM graphic boards to timber and light-gauge steel framing where extra length is needed - thicker or multi-layer panel build-ups, deeper embedment into softer timber, and hoardings under higher wind load. The low-profile wafer head and colour-matched powder coat keep fixings discreet against printed graphics.
The additional 6mm of thread over HP19 increases withdrawal resistance where panels are exposed to greater wind uplift or fixed at wider centres. Use with a variable-speed driver and PH2 bit. Avoid overdriving.
Fixing schedules for wind-loaded hoardings should be confirmed by the temporary works designer. For fixing panels to metal framework, use PanelPro™ HP25-SD self-drilling screws.
Loading delivery information...