Description
Light ivory is a pale, warm tone that sits at the softer end of the white and cream family. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1015 Light Ivory are powder coated to match the gentle, straw-influenced cream used across off-white cladding systems, light steel framing and roofing structures where a warm, composed fixing is required on exposed metalwork. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and softness.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork, metal roofing and sheet metal fabrication work in ivory and warm cream colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1015 Light Ivory
RAL 1015 Light Ivory occupies a specific place in the warm white and cream palette. It is noticeably warmer than RAL 9010 Pure White and softer than RAL 1013 Oyster White, sitting closer to a pale straw or antique ivory tone. This colour appears on decorative cladding systems, light steel framing finished in warm off-white and roofing structures where the coating carries a pale ivory character rather than a clean white or strong cream.
Getting the white and cream family right on exposed metalwork matters. A fixing that reads as too cool, too bright or too yellow each introduces a different kind of mismatch against a surface in RAL 1015. Each bolt head is powder coated to the exact RAL 1015 Classic standard, producing a consistent pale ivory finish that integrates with the metalwork rather than contrasting against it. On installations where hex head bolts are visible at regular fixing centres, that precision holds the appearance of the structure together.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1015 Light Ivory hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a pale ivory colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in light ivory or warm cream
- Metal roofing sheets, flashings and roof structure connections in warm off-white colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1015
- ACM panel systems and exposed metalwork where a colour-matched hex head fixing is specified
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
What panels and cladding systems use RAL 1015 Light Ivory?
RAL 1015 Light Ivory is found on decorative cladding systems, light steel framing products and roofing structures where a soft, warm off-white has been specified. It is also used on commercial fascia and architectural metalwork where the design moves away from clinical whites toward a warmer, more refined cream tone. If your steel structure or cladding reads as a pale ivory or straw-influenced white rather than a cool bright white, RAL 1015 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1015 Light Ivory is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Description
Light ivory is a pale, warm tone that sits at the softer end of the white and cream family. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1015 Light Ivory are powder coated to match the gentle, straw-influenced cream used across off-white cladding systems, light steel framing and roofing structures where a warm, composed fixing is required on exposed metalwork. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and softness.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork, metal roofing and sheet metal fabrication work in ivory and warm cream colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1015 Light Ivory
RAL 1015 Light Ivory occupies a specific place in the warm white and cream palette. It is noticeably warmer than RAL 9010 Pure White and softer than RAL 1013 Oyster White, sitting closer to a pale straw or antique ivory tone. This colour appears on decorative cladding systems, light steel framing finished in warm off-white and roofing structures where the coating carries a pale ivory character rather than a clean white or strong cream.
Getting the white and cream family right on exposed metalwork matters. A fixing that reads as too cool, too bright or too yellow each introduces a different kind of mismatch against a surface in RAL 1015. Each bolt head is powder coated to the exact RAL 1015 Classic standard, producing a consistent pale ivory finish that integrates with the metalwork rather than contrasting against it. On installations where hex head bolts are visible at regular fixing centres, that precision holds the appearance of the structure together.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1015 Light Ivory hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a pale ivory colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in light ivory or warm cream
- Metal roofing sheets, flashings and roof structure connections in warm off-white colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1015
- ACM panel systems and exposed metalwork where a colour-matched hex head fixing is specified
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
What panels and cladding systems use RAL 1015 Light Ivory?
RAL 1015 Light Ivory is found on decorative cladding systems, light steel framing products and roofing structures where a soft, warm off-white has been specified. It is also used on commercial fascia and architectural metalwork where the design moves away from clinical whites toward a warmer, more refined cream tone. If your steel structure or cladding reads as a pale ivory or straw-influenced white rather than a cool bright white, RAL 1015 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1015 Light Ivory is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Light ivory is a pale, warm tone that sits at the softer end of the white and cream family. These 13mm x 4.2mm hex head self-drilling tek bolts in RAL 1015 Light Ivory are powder coated to match the gentle, straw-influenced cream used across off-white cladding systems, light steel framing and roofing structures where a warm, composed fixing is required on exposed metalwork. On a steel surface in this colour, a bright zinc hex head reads as a cold, metallic intrusion against a tone chosen for its warmth and softness.
The self-drilling Tek point cuts directly into light-gauge steel up to 3.0mm thick without pre-drilling, removing a step from installation on cladding rail and purlin fixing work. The hex head washer face spreads clamping load across the steel substrate, and the 1/4" hex drive is compatible with standard impact drivers and hex socket nut runners for fast, controlled installation across large steel structures.
These bolts are designed for steel-to-steel fixing applications only. For timber, plastic or composite panel substrates, the flange head self-tapping range is the correct specification. On steel cladding rails, purlins, HVAC ductwork, metal roofing and sheet metal fabrication work in ivory and warm cream colour schemes, these hex head tek bolts deliver a colour-matched head that eliminates the visible bright metal that standard fixings introduce.
RAL 1015 Light Ivory
RAL 1015 Light Ivory occupies a specific place in the warm white and cream palette. It is noticeably warmer than RAL 9010 Pure White and softer than RAL 1013 Oyster White, sitting closer to a pale straw or antique ivory tone. This colour appears on decorative cladding systems, light steel framing finished in warm off-white and roofing structures where the coating carries a pale ivory character rather than a clean white or strong cream.
Getting the white and cream family right on exposed metalwork matters. A fixing that reads as too cool, too bright or too yellow each introduces a different kind of mismatch against a surface in RAL 1015. Each bolt head is powder coated to the exact RAL 1015 Classic standard, producing a consistent pale ivory finish that integrates with the metalwork rather than contrasting against it. On installations where hex head bolts are visible at regular fixing centres, that precision holds the appearance of the structure together.
All RAL colours in the RALfixings range are held in stock for immediate dispatch without special order lead times on live project schedules.
Suitable Applications
13mm RAL 1015 Light Ivory hex head self-drilling tek bolts are used across:
- Fixing cladding rails to structural steel where a pale ivory colour-matched fixing is required
- Light-gauge steel framing, purlins and lintels finished in light ivory or warm cream
- Metal roofing sheets, flashings and roof structure connections in warm off-white colour schemes
- HVAC ductwork, sheet metal fabrication and metal panel installations in RAL 1015
- ACM panel systems and exposed metalwork where a colour-matched hex head fixing is specified
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 13mm |
| Thread Diameter | 4.2mm |
| Thread Size | 8 x 1/2" |
| Head Type | Hex Head Washer Faced |
| Drive | 1/4" Hex (6.35mm) |
| Point Type | Self-Drilling (Tek) |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Max Substrate Thickness | 3.0mm (light section steel) |
| Substrates | Steel, Sheet Metal |
Frequently Asked Questions
What panels and cladding systems use RAL 1015 Light Ivory?
RAL 1015 Light Ivory is found on decorative cladding systems, light steel framing products and roofing structures where a soft, warm off-white has been specified. It is also used on commercial fascia and architectural metalwork where the design moves away from clinical whites toward a warmer, more refined cream tone. If your steel structure or cladding reads as a pale ivory or straw-influenced white rather than a cool bright white, RAL 1015 is the correct specification.
Do these bolts require pre-drilling?
No. The self-drilling Tek point cuts its own hole and forms the thread as it is driven into the substrate, removing the need to pre-drill. These bolts are rated for light section steel up to 3.0mm thick. For substrates thicker than 3.0mm, a different fixing specification is required.
Can these be used on timber or plastic substrates?
No. These hex head self-drilling tek bolts are designed for steel-to-steel applications only. For timber, plastic or composite panel substrates, the RALfixings flange head self-tapping range is the correct product.
How quickly can you deliver?
RAL 1015 Light Ivory is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the compromise of bright zinc heads on exposed metalwork. Every fixing in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the bolt head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category: adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated hex head tek bolts:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 13mm x 4.2mm hex head self-drilling tek bolts are available in over 60 colour-matched RAL finishes for cladding, roofing and exposed steel metalwork.
Recommended applications
Designed for fixing cladding rails, purlins, and light steel framing to structural steel substrates. The powder-coated hex head matches your panel or cladding RAL precisely, eliminating visible bright metal fixings on exposed metalwork. The self-drilling point removes the need for pre-drilling in light gauge steel.
At 13mm, these bolts are ideal for thin sheet metal connections and light-gauge steel framing where a short fixing length is required. The 1/4" hex drive (6.35mm) is compatible with standard impact drivers and hex socket nut runners.
Not recommended for timber or plastic substrates — use our flange head self tapping range for non-steel applications.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
