Description
Pearl gold sits at the boundary between yellow and brown, with a deep, metallic warmth that places it firmly outside the range of standard fixing colours. These 25mm x 4.2mm flange head self tapping screws in RAL 1036 Pearl Gold are powder coated to match the rich, burnished tone used across prestige signage, decorative cladding and architectural metalwork where a warm gold has been specified. On surfaces in this colour, a zinc or grey fixing introduces a cold contrast that is immediately visible against the depth of the panel tone.
The 25mm length provides the thread engagement needed where the substrate has depth behind the panel face. Timber batten frames, composite panels with a backing layer and exposed installations where pull-out resistance is required under wind loading all call for a screw that passes through the panel and bites firmly into the fixing frame below. On these applications the 25mm is the right specification.
The flange head distributes clamping force across a wide bearing surface, preventing the point loading that narrower head designs apply to the panel skin. On ACM sheet, Foamex and rigid composite boards this is the difference between a flat, clean fixing and a dimpled or stressed surface around the screw head. The Pozi PZ2 recess drives positively at installation torque with minimal cam-out, leaving the head surface and powder coat intact.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling. The thread pulls cleanly through softwood timber battens and holds firmly in both substrate types.
RAL 1036 Pearl Gold
RAL 1036 Pearl Gold is a deep, warm gold with a brown undertone that gives it a richness closer to antique or burnished gold than to the bright yellows of the RAL 1000 series. It is not a shiny or metallic finish in the conventional sense; the pearl quality refers to the depth and warmth of the tone rather than a gloss or iridescent surface. This is a colour associated with prestige, heritage and quality, and it appears on premium signage, architectural lettering, decorative fascia panels and high-end retail and hospitality fit-out where a gold tone has been deliberately chosen as part of the design identity.
Each screw head is powder coated to the exact RAL 1036 Classic standard. On gold-toned cladding, signage trays and decorative panels where fixings sit on the visible face of the installation, a colour-matched head in RAL 1036 becomes part of the surface rather than a compromise within it. The consistency of powder coating to the RAL Classic standard means every head in the pack matches to the same tolerance, which matters on prestige installations where finish quality is scrutinised.
RAL 1036 is also used on industrial and agricultural structures where a warm, ochre-gold tone has been specified, as well as on specialist hoarding installations forming part of a branded scheme. Across all these applications the requirement is the same: a fixing that holds the finish rather than interrupting it.
All RAL colours in the RALfixings range are held in stock for dispatch without special order delays on live project schedules.
Suitable Applications
25mm painted flange head screws in RAL 1036 Pearl Gold are used across:
- Prestige signage, architectural lettering and decorative fascia panels in gold colour schemes
- High-end retail, hospitality and leisure fit-out panels specified in RAL 1036
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Architectural cladding and feature panels where a warm gold tone forms part of the design palette
- Branded hoarding installations and commercial structures finished in pearl gold
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1036 Pearl Gold |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
Is RAL 1036 Pearl Gold a metallic or gloss finish?
RAL 1036 Pearl Gold is a solid powder coat colour, not a metallic or gloss paint finish. The pearl quality in the name refers to the depth and warmth of the tone rather than a shiny or iridescent surface effect. The finish is a hard, matte-to-satin powder coat that matches the RAL 1036 Classic colour standard. If your panels carry a genuine metallic gold finish, RAL 1036 will read as a warm gold tone but will not replicate a brushed or polished metal effect.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1036 Pearl Gold is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings gives contractors and specifiers access to colour-matched visible fixings without painting screws on site or accepting a tone that does not match the panel system. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint in adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Description
Pearl gold sits at the boundary between yellow and brown, with a deep, metallic warmth that places it firmly outside the range of standard fixing colours. These 25mm x 4.2mm flange head self tapping screws in RAL 1036 Pearl Gold are powder coated to match the rich, burnished tone used across prestige signage, decorative cladding and architectural metalwork where a warm gold has been specified. On surfaces in this colour, a zinc or grey fixing introduces a cold contrast that is immediately visible against the depth of the panel tone.
The 25mm length provides the thread engagement needed where the substrate has depth behind the panel face. Timber batten frames, composite panels with a backing layer and exposed installations where pull-out resistance is required under wind loading all call for a screw that passes through the panel and bites firmly into the fixing frame below. On these applications the 25mm is the right specification.
The flange head distributes clamping force across a wide bearing surface, preventing the point loading that narrower head designs apply to the panel skin. On ACM sheet, Foamex and rigid composite boards this is the difference between a flat, clean fixing and a dimpled or stressed surface around the screw head. The Pozi PZ2 recess drives positively at installation torque with minimal cam-out, leaving the head surface and powder coat intact.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling. The thread pulls cleanly through softwood timber battens and holds firmly in both substrate types.
RAL 1036 Pearl Gold
RAL 1036 Pearl Gold is a deep, warm gold with a brown undertone that gives it a richness closer to antique or burnished gold than to the bright yellows of the RAL 1000 series. It is not a shiny or metallic finish in the conventional sense; the pearl quality refers to the depth and warmth of the tone rather than a gloss or iridescent surface. This is a colour associated with prestige, heritage and quality, and it appears on premium signage, architectural lettering, decorative fascia panels and high-end retail and hospitality fit-out where a gold tone has been deliberately chosen as part of the design identity.
Each screw head is powder coated to the exact RAL 1036 Classic standard. On gold-toned cladding, signage trays and decorative panels where fixings sit on the visible face of the installation, a colour-matched head in RAL 1036 becomes part of the surface rather than a compromise within it. The consistency of powder coating to the RAL Classic standard means every head in the pack matches to the same tolerance, which matters on prestige installations where finish quality is scrutinised.
RAL 1036 is also used on industrial and agricultural structures where a warm, ochre-gold tone has been specified, as well as on specialist hoarding installations forming part of a branded scheme. Across all these applications the requirement is the same: a fixing that holds the finish rather than interrupting it.
All RAL colours in the RALfixings range are held in stock for dispatch without special order delays on live project schedules.
Suitable Applications
25mm painted flange head screws in RAL 1036 Pearl Gold are used across:
- Prestige signage, architectural lettering and decorative fascia panels in gold colour schemes
- High-end retail, hospitality and leisure fit-out panels specified in RAL 1036
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Architectural cladding and feature panels where a warm gold tone forms part of the design palette
- Branded hoarding installations and commercial structures finished in pearl gold
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1036 Pearl Gold |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
Is RAL 1036 Pearl Gold a metallic or gloss finish?
RAL 1036 Pearl Gold is a solid powder coat colour, not a metallic or gloss paint finish. The pearl quality in the name refers to the depth and warmth of the tone rather than a shiny or iridescent surface effect. The finish is a hard, matte-to-satin powder coat that matches the RAL 1036 Classic colour standard. If your panels carry a genuine metallic gold finish, RAL 1036 will read as a warm gold tone but will not replicate a brushed or polished metal effect.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1036 Pearl Gold is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings gives contractors and specifiers access to colour-matched visible fixings without painting screws on site or accepting a tone that does not match the panel system. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint in adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Pearl gold sits at the boundary between yellow and brown, with a deep, metallic warmth that places it firmly outside the range of standard fixing colours. These 25mm x 4.2mm flange head self tapping screws in RAL 1036 Pearl Gold are powder coated to match the rich, burnished tone used across prestige signage, decorative cladding and architectural metalwork where a warm gold has been specified. On surfaces in this colour, a zinc or grey fixing introduces a cold contrast that is immediately visible against the depth of the panel tone.
The 25mm length provides the thread engagement needed where the substrate has depth behind the panel face. Timber batten frames, composite panels with a backing layer and exposed installations where pull-out resistance is required under wind loading all call for a screw that passes through the panel and bites firmly into the fixing frame below. On these applications the 25mm is the right specification.
The flange head distributes clamping force across a wide bearing surface, preventing the point loading that narrower head designs apply to the panel skin. On ACM sheet, Foamex and rigid composite boards this is the difference between a flat, clean fixing and a dimpled or stressed surface around the screw head. The Pozi PZ2 recess drives positively at installation torque with minimal cam-out, leaving the head surface and powder coat intact.
A 60° self-tapping thread and AB point allow direct installation into light-gauge steel and sheet metal frames without pre-drilling. The thread pulls cleanly through softwood timber battens and holds firmly in both substrate types.
RAL 1036 Pearl Gold
RAL 1036 Pearl Gold is a deep, warm gold with a brown undertone that gives it a richness closer to antique or burnished gold than to the bright yellows of the RAL 1000 series. It is not a shiny or metallic finish in the conventional sense; the pearl quality refers to the depth and warmth of the tone rather than a gloss or iridescent surface. This is a colour associated with prestige, heritage and quality, and it appears on premium signage, architectural lettering, decorative fascia panels and high-end retail and hospitality fit-out where a gold tone has been deliberately chosen as part of the design identity.
Each screw head is powder coated to the exact RAL 1036 Classic standard. On gold-toned cladding, signage trays and decorative panels where fixings sit on the visible face of the installation, a colour-matched head in RAL 1036 becomes part of the surface rather than a compromise within it. The consistency of powder coating to the RAL Classic standard means every head in the pack matches to the same tolerance, which matters on prestige installations where finish quality is scrutinised.
RAL 1036 is also used on industrial and agricultural structures where a warm, ochre-gold tone has been specified, as well as on specialist hoarding installations forming part of a branded scheme. Across all these applications the requirement is the same: a fixing that holds the finish rather than interrupting it.
All RAL colours in the RALfixings range are held in stock for dispatch without special order delays on live project schedules.
Suitable Applications
25mm painted flange head screws in RAL 1036 Pearl Gold are used across:
- Prestige signage, architectural lettering and decorative fascia panels in gold colour schemes
- High-end retail, hospitality and leisure fit-out panels specified in RAL 1036
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Architectural cladding and feature panels where a warm gold tone forms part of the design palette
- Branded hoarding installations and commercial structures finished in pearl gold
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1036 Pearl Gold |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
Frequently Asked Questions
Is RAL 1036 Pearl Gold a metallic or gloss finish?
RAL 1036 Pearl Gold is a solid powder coat colour, not a metallic or gloss paint finish. The pearl quality in the name refers to the depth and warmth of the tone rather than a shiny or iridescent surface effect. The finish is a hard, matte-to-satin powder coat that matches the RAL 1036 Classic colour standard. If your panels carry a genuine metallic gold finish, RAL 1036 will read as a warm gold tone but will not replicate a brushed or polished metal effect.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1036 Pearl Gold is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings gives contractors and specifiers access to colour-matched visible fixings without painting screws on site or accepting a tone that does not match the panel system. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint in adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Recommended applications
Designed for fixing ACM panels, composite cladding, and timber facade boards to timber battens and structural substrates. The powder-coated head matches your panel RAL precisely, eliminating visible bright metal fixings against the facade surface.
Pre-drilling recommended for hardwoods over 20mm density. The flange head spreads clamping force across a wider footprint, reducing surface pitting and preventing pull-through on thinner sheet materials.
Not recommended for fixing into steel framing — use our self-drilling range for steel substrates.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
