RoofingPro RS25 Roofing Screws - 25mm - RAL 7042 Traffic Grey

(No reviews) Write a Review
Screw Length: 25mm
Thread Size: 5.5mm
Material: Carbon Steel
Head Type: Hex Head
Recess: Hexagon
Thread Type: Self Drilling
With Washer: Yes
Washer Type: EPDM Colour Matched
RAL Colour: 7042
Colour Name: Traffic Grey
Range: RoofingPro
colour_swatch: RAL 7042 Traffic Grey
tech_thread_type: Self Drilling (SD)
tech_head_style: Hex Head
tech_drive_type: 5/16 Hex Socket (8mm)
tech_length: 25mm
tech_diameter: 5.5mm
tech_gauge: No. 12
tech_point_type: Self-Drilling No.3
tech_steel_capacity: Up to 5mm total (Max Drilling Thickness)
tech_material: BZP Steel
tech_coating: Premium powder coat
tech_ral_code: RAL 7042
tech_ral_name: Traffic Grey
tech_colour_system: RAL Classic
colour_count: 40
  • Guaranteed Colour Match

    Matched to RAL Classic colours

  • In-House Experts

    We know our products

  • Durable Finish

    Dual layer powder coating

  • Same-Day Despatch*

    Order before 12pm

* Same-day despatch applies to stocked items only. Contact us if you need your order sooner than the stated lead time. Product images are for illustration only and should not be relied on as an accurate colour match – request a physical sample for an exact match.

RoofingPro RS25 Roofing Screws - 25mm - RAL 7042 Traffic Grey
RoofingPro RS25 Roofing Screws - 25mm - RAL 7042 Traffic Grey
£0.34

Description

The RoofingPro™ RS25 is a 25mm x 5.5mm hex head self-drilling roofing screw finished in RAL 7042 Traffic Grey. It fixes profiled metal roofing and wall cladding sheets directly to light section steel without a pilot hole, and it does it in a colour that disappears against the sheet rather than sitting on top of it.

Built for roofing contractors, cladding installers and steel-frame fabricators working on commercial, industrial and agricultural envelopes. The No.3 self-drilling point cuts through steel up to 5mm thick, so purlins, rails and sheeting rails are all within range from a single fixing.

At 25mm it is the low-profile option in the range, made for direct metal-to-metal fixing and thin light-section steel where a longer screw would simply be wasted length behind the sheet. The 10mm of effective thread engages behind the sheet to pull it tight to the steel.

Both the hex head and the EPDM sealing washer are powder coated in RAL 7042. Most coloured roofing screws stop at the head and leave a black rubber washer showing beneath it. This one does not.

Colour Matched in RAL 7042 Traffic Grey

Traffic grey is the mid-tone grey used across transport infrastructure, plant rooms, light industrial units and service buildings. It is bright enough to read as a deliberate finish rather than bare metal.

RAL 7042 is a clean mid-tone neutral grey, and the RS25 carries it across the full hex head and the bonded EPDM washer beneath. RAL 7042 is frequently specified alongside anthracite as a secondary or contrast colour, used on trims, flashings and lower panels where a lighter grey lifts an otherwise dark envelope.

Colour matching the fixing is not cosmetic detailing. On a roof or elevation that carries several hundred visible screws, an unmatched head is the detail a client notices from the car park and a specifier notices at handover.

Held in stock for rapid dispatch alongside the rest of the core RoofingPro palette.

Site Applications

Where the RS25 is most often used on site:

  • Metal-to-metal fixing of thin roofing and cladding sheets onto light steel sections
  • Trims, flashings and closure pieces onto steel up to 5mm thick
  • Low-profile sheet fixing where a shorter screw avoids over-penetration
  • Signage and panel fixing onto light-gauge steel and aluminium subframes
  • Overlap and stitching fixing on profiled metal sheet

Typical fixing centres: 300mm - 500mm at sheet ends and 500mm - 1000mm at intermediate purlins (subject to sheet profile and wind loading).

Specification

Specification at a glance:

Size 5.5mm x 25mm
Head Type Hex
Socket Size 8mm
Point Type Self-Drilling No.3
Thread Type 60° Self-Tapping
Effective Thread Length 10mm
EPDM Washer 16mm
FW Ø 11mm
Max Drilling Thickness 5mm
Material Case & Core Hardened Carbon Steel
Substrate Steel
Shank Finish Bright Zinc Plated
Head & Washer Finish Powder Coated
Colour RAL 7042 Traffic Grey

Frequently Asked Questions

What are these screws for?

Fixing profiled metal roofing and wall cladding sheets to light section steel framing without pre-drilling, in a finish that matches the sheet.

Are the head and washer the same colour?

Yes, both are powder coated in RAL 7042 Traffic Grey. Coating the EPDM washer as well as the head is what separates the RoofingPro range from a standard coloured tek screw.

What steel thickness can they handle?

Up to 5mm. Beyond that a higher-rated drill point or a pre-drilled hole is required.

Can I order a small quantity?

Yes. The range is sold by the unit, so you can order exactly what a job needs. Quantity breaks start at 200 screws.

Powder Coated Roofing Screws

Colour-matched fixings are all we do. Powder coating in-house means the RAL reference on the box is the RAL reference on the screw, and it means we can carry the finish across both the hex head and the sealing washer.

Electrostatically applied and heat cured, powder coating produces a harder, thicker and more durable finish than wet paint. On a roof fixing exposed to standing water, UV and thermal cycling for decades, that difference is the whole point.

Benefits of powder coated roofing screws:

  • Scratch resistant
  • Rust resistant
  • UV resistant
  • Weather resistant
  • Colourfast

Other RoofingPro RS25 Colour Options

RoofingPro™ RS25 roofing screws are stocked in six core RAL finishes matched to the most widely specified roofing and cladding colours, with further RAL references powder coated to order.

tech_thread_type Self Drilling (SD)
tech_head_style Hex Head
tech_drive_type 5/16 Hex Socket (8mm)
tech_length 25mm
tech_diameter 5.5mm
tech_gauge No. 12
tech_point_type Self-Drilling No.3
tech_steel_capacity Up to 5mm total (Max Drilling Thickness)
tech_material BZP Steel
tech_coating Premium powder coat
tech_ral_code RAL 7042
tech_ral_name Traffic Grey
tech_colour_system RAL Classic

Recommended applications

Engineered for fixing profiled metal roofing and wall cladding sheets to light section steel framing on commercial, industrial and agricultural buildings. The 25mm length suits thin metal-to-metal fixing and light steel sections. The powder coated hex head and colour-matched EPDM washer keep fixings visually consistent with the sheet across an entire elevation.

The No.3 self-drilling point cuts through steel up to 5mm without a pilot hole. Drive with an 8mm socket in a variable-speed driver and stop as soon as the washer compresses evenly. Overdriving crushes the EPDM and destroys the seal.

Not suitable for fixing into timber — the self-drilling point is designed for steel substrates. For timber framing see our self-tapping wafer head range.

Suitable for

Profiled Metal RoofingBox profile, corrugated and trapezoidal roof sheets
Metal Wall CladdingVertical and horizontal cladding, rainscreen panels
Steel Purlins & RailsZ and C section purlins, sheeting rails up to 5mm
Light Section Steel FramePortal frames, agricultural and industrial steelwork
Flashings & TrimsRidge caps, barge boards, eaves and verge trims

Loading delivery information...

Certificate of Conformity
ISO 9001 Approved
60+ RAL Colours
Fast UK Despatch