Description
Visible fixings on off-white and warm white panels draw the eye the moment they deviate from the background. These 25mm x 4.2mm hoarding screws in RAL 1013 Oyster White are powder coated to match the warm, slightly cream-toned white common across composite cladding panels, printed hoarding boards and commercial fascia systems, eliminating the contrast that zinc or bright white fixings introduce against panels that are not a true optical white.
The 25mm length gives these screws meaningful reach beyond the panel face and into the substrate behind. On installations where panels are thicker, where timber battens sit behind the cladding, or where wind loading demands positive pull-out resistance, the extra thread engagement matters. These are not general-purpose screws dressed up in colour - the length and geometry are chosen for the application.
The flange head is the right head type for face-fixed panel work. Its wide bearing surface spreads clamping force across the panel skin rather than concentrating it at a point, which prevents the dimpling and micro-cracking that pan head or countersunk designs can cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly with minimal cam-out at installation torque, keeping the head surface intact and the finish unbroken.
A 60° self-tapping thread and AB point allow direct fixing into light-gauge steel and sheet metal frames without pre-drilling. In timber subframes the thread pulls through cleanly and bites with strong holding power in softwood battens commonly used on hoarding structures.
RAL 1013 Oyster White
RAL 1013 is one of the most frequently misidentified whites on site. Contractors ordering RAL 9010 for a warm white panel system often find the resulting fixing stands out rather than disappears - because 9010 reads as a cool, blue-white against panels with a cream or yellow undertone. RAL 1013 Oyster White sits in the warm white family and is the standard specified colour for many timber-effect and off-white hoarding board systems, composite ACM panels and commercial cladding products produced by UK and European manufacturers.
Each screw head is powder coated in RAL 1013 Oyster White to the exact RAL Classic standard, providing a consistent warm white finish that integrates with the panel surface rather than sitting against it. On large hoarding runs or multi-panel signage installations where fixings are spaced at regular centres across the face, colour-matched heads remove the visual noise that standard metallic fixings introduce.
The warm white palette is well established in retail fit-out, commercial signage and temporary hoarding for high-footfall locations where the finished appearance is held to a higher standard than a utility construction site. Specifiers working on these projects increasingly require colour-matched fixings as a standard rather than an optional detail.
All RAL colours in the RALfixings range are held in stock, giving procurement teams and site managers reliable access to colour-matched fixings without project lead time risk.
Suitable Applications
25mm painted flange head screws in RAL 1013 Oyster White are used across:
- Construction site hoardings on timber or light steel frames where panels carry a warm white finish
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards in retail, events and temporary signage
- Commercial fascia systems and signage trays in off-white and oyster white colour schemes
- Ventilation duct cladding, service enclosures and access panels finished in warm white
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1013 Oyster White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
For full dimensions, installation guidance and compliance information see the 25mm x 4.2mm Flange Head Self Tapping Screw technical specification.
Frequently Asked Questions
What is the difference between RAL 1013 Oyster White and RAL 9010 Pure White?
RAL 9010 is a cool, bright white commonly used in signage and industrial applications. RAL 1013 Oyster White carries a warm, slightly yellow-cream undertone that is a standard match for many hoarding board manufacturers, composite panel suppliers and commercial cladding systems. If your panels have a warm white tone rather than a blue-white appearance, RAL 1013 is almost certainly the correct match.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1013 Oyster White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category; adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Description
Visible fixings on off-white and warm white panels draw the eye the moment they deviate from the background. These 25mm x 4.2mm hoarding screws in RAL 1013 Oyster White are powder coated to match the warm, slightly cream-toned white common across composite cladding panels, printed hoarding boards and commercial fascia systems, eliminating the contrast that zinc or bright white fixings introduce against panels that are not a true optical white.
The 25mm length gives these screws meaningful reach beyond the panel face and into the substrate behind. On installations where panels are thicker, where timber battens sit behind the cladding, or where wind loading demands positive pull-out resistance, the extra thread engagement matters. These are not general-purpose screws dressed up in colour - the length and geometry are chosen for the application.
The flange head is the right head type for face-fixed panel work. Its wide bearing surface spreads clamping force across the panel skin rather than concentrating it at a point, which prevents the dimpling and micro-cracking that pan head or countersunk designs can cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly with minimal cam-out at installation torque, keeping the head surface intact and the finish unbroken.
A 60° self-tapping thread and AB point allow direct fixing into light-gauge steel and sheet metal frames without pre-drilling. In timber subframes the thread pulls through cleanly and bites with strong holding power in softwood battens commonly used on hoarding structures.
RAL 1013 Oyster White
RAL 1013 is one of the most frequently misidentified whites on site. Contractors ordering RAL 9010 for a warm white panel system often find the resulting fixing stands out rather than disappears - because 9010 reads as a cool, blue-white against panels with a cream or yellow undertone. RAL 1013 Oyster White sits in the warm white family and is the standard specified colour for many timber-effect and off-white hoarding board systems, composite ACM panels and commercial cladding products produced by UK and European manufacturers.
Each screw head is powder coated in RAL 1013 Oyster White to the exact RAL Classic standard, providing a consistent warm white finish that integrates with the panel surface rather than sitting against it. On large hoarding runs or multi-panel signage installations where fixings are spaced at regular centres across the face, colour-matched heads remove the visual noise that standard metallic fixings introduce.
The warm white palette is well established in retail fit-out, commercial signage and temporary hoarding for high-footfall locations where the finished appearance is held to a higher standard than a utility construction site. Specifiers working on these projects increasingly require colour-matched fixings as a standard rather than an optional detail.
All RAL colours in the RALfixings range are held in stock, giving procurement teams and site managers reliable access to colour-matched fixings without project lead time risk.
Suitable Applications
25mm painted flange head screws in RAL 1013 Oyster White are used across:
- Construction site hoardings on timber or light steel frames where panels carry a warm white finish
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards in retail, events and temporary signage
- Commercial fascia systems and signage trays in off-white and oyster white colour schemes
- Ventilation duct cladding, service enclosures and access panels finished in warm white
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1013 Oyster White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
For full dimensions, installation guidance and compliance information see the 25mm x 4.2mm Flange Head Self Tapping Screw technical specification.
Frequently Asked Questions
What is the difference between RAL 1013 Oyster White and RAL 9010 Pure White?
RAL 9010 is a cool, bright white commonly used in signage and industrial applications. RAL 1013 Oyster White carries a warm, slightly yellow-cream undertone that is a standard match for many hoarding board manufacturers, composite panel suppliers and commercial cladding systems. If your panels have a warm white tone rather than a blue-white appearance, RAL 1013 is almost certainly the correct match.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1013 Oyster White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category; adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
Visible fixings on off-white and warm white panels draw the eye the moment they deviate from the background. These 25mm x 4.2mm hoarding screws in RAL 1013 Oyster White are powder coated to match the warm, slightly cream-toned white common across composite cladding panels, printed hoarding boards and commercial fascia systems, eliminating the contrast that zinc or bright white fixings introduce against panels that are not a true optical white.
The 25mm length gives these screws meaningful reach beyond the panel face and into the substrate behind. On installations where panels are thicker, where timber battens sit behind the cladding, or where wind loading demands positive pull-out resistance, the extra thread engagement matters. These are not general-purpose screws dressed up in colour - the length and geometry are chosen for the application.
The flange head is the right head type for face-fixed panel work. Its wide bearing surface spreads clamping force across the panel skin rather than concentrating it at a point, which prevents the dimpling and micro-cracking that pan head or countersunk designs can cause on ACM sheet, Foamex and rigid composite boards. The Pozi PZ2 recess drives cleanly with minimal cam-out at installation torque, keeping the head surface intact and the finish unbroken.
A 60° self-tapping thread and AB point allow direct fixing into light-gauge steel and sheet metal frames without pre-drilling. In timber subframes the thread pulls through cleanly and bites with strong holding power in softwood battens commonly used on hoarding structures.
RAL 1013 Oyster White
RAL 1013 is one of the most frequently misidentified whites on site. Contractors ordering RAL 9010 for a warm white panel system often find the resulting fixing stands out rather than disappears - because 9010 reads as a cool, blue-white against panels with a cream or yellow undertone. RAL 1013 Oyster White sits in the warm white family and is the standard specified colour for many timber-effect and off-white hoarding board systems, composite ACM panels and commercial cladding products produced by UK and European manufacturers.
Each screw head is powder coated in RAL 1013 Oyster White to the exact RAL Classic standard, providing a consistent warm white finish that integrates with the panel surface rather than sitting against it. On large hoarding runs or multi-panel signage installations where fixings are spaced at regular centres across the face, colour-matched heads remove the visual noise that standard metallic fixings introduce.
The warm white palette is well established in retail fit-out, commercial signage and temporary hoarding for high-footfall locations where the finished appearance is held to a higher standard than a utility construction site. Specifiers working on these projects increasingly require colour-matched fixings as a standard rather than an optional detail.
All RAL colours in the RALfixings range are held in stock, giving procurement teams and site managers reliable access to colour-matched fixings without project lead time risk.
Suitable Applications
25mm painted flange head screws in RAL 1013 Oyster White are used across:
- Construction site hoardings on timber or light steel frames where panels carry a warm white finish
- ACM and Dibond™ panel installations on deeper substructures requiring extended thread engagement
- Printed Foamex and rigid PVC graphic boards in retail, events and temporary signage
- Commercial fascia systems and signage trays in off-white and oyster white colour schemes
- Ventilation duct cladding, service enclosures and access panels finished in warm white
Pack Sizes Available
Supplied in trade-ready packs of:
- 100
- 200
- 500
- 1000
- 2000
- 5000
Specification
| Length | 25mm |
| Thread Diameter | 4.2mm |
| Gauge | 8 |
| Head Type | Flange Head |
| Thread Type | 60° Self-Tapping |
| Point Type | AB Point |
| Recess | Pozi PZ2 |
| Material | Carbon Steel (Bright Zinc Plated) |
| Head Finish | Powder Coated RAL 1013 Oyster White |
| Standard | BS 4174:1972 |
| Substrates | Steel, Thin Sheet Metal, Timber |
For full dimensions, installation guidance and compliance information see the 25mm x 4.2mm Flange Head Self Tapping Screw technical specification.
Frequently Asked Questions
What is the difference between RAL 1013 Oyster White and RAL 9010 Pure White?
RAL 9010 is a cool, bright white commonly used in signage and industrial applications. RAL 1013 Oyster White carries a warm, slightly yellow-cream undertone that is a standard match for many hoarding board manufacturers, composite panel suppliers and commercial cladding systems. If your panels have a warm white tone rather than a blue-white appearance, RAL 1013 is almost certainly the correct match.
When should I use 25mm screws instead of 19mm?
The 25mm length provides additional thread engagement for thicker substrates, deeper timber battens and double-skin panel assemblies. Where the 19mm version suits single-skin sheet metal connections, the 25mm delivers extra grip and pull-out resistance when the screw needs to pass through the panel face and reach solidly into the frame behind.
Can these be used to fix hoarding panels to timber frames?
Yes. The 25mm length and self-tapping AB point thread make these screws well suited to fixing panels to the timber battens and stud frames used on construction hoarding. The flange head distributes clamping force across a wide footprint to hold the panel flat, while the extra length provides firm engagement into the timber behind.
How quickly can you deliver?
RAL 1013 Oyster White is held in stock. Most orders dispatch next working day on a tracked 24-hour service. Larger volume orders typically ship within 3 to 5 working days.
Powder Coated Screws
RALfixings exists to give contractors and specifiers access to colour-matched visible fixings without the on-site hassle of painting screws or accepting the compromise of mismatched alternatives. Every screw in the range is powder coated in-house to exact RAL Classic colour standards, with consistent batch-to-batch colour accuracy across every pack size.
The electrostatic powder coating process deposits a fine layer of thermoset pigment onto the screw head, which is then cured under heat to form a hard, permanently bonded shell. This finish outperforms wet paint across every measurable category; adhesion, hardness, chip resistance, UV stability and colour consistency across production runs.
Benefits of powder coated self tapping screws:
- Scratch resistant
- Rust resistant
- UV resistant
- Weather resistant
- Colourfast
Other Colour Options
These 25mm x 4.2mm painted flange head self tapping screws are available in over 60 colour-matched RAL finishes for hoarding panels, signage and visible metalwork.
Recommended applications
Designed for fixing ACM panels, composite cladding, and timber facade boards to timber battens and structural substrates. The powder-coated head matches your panel RAL precisely, eliminating visible bright metal fixings against the facade surface.
Pre-drilling recommended for hardwoods over 20mm density. The flange head spreads clamping force across a wider footprint, reducing surface pitting and preventing pull-through on thinner sheet materials.
Not recommended for fixing into steel framing — use our self-drilling range for steel substrates.
Suitable for
In Stock
*Min Order Quantity: 100
| Bulk Discount | ||
|---|---|---|
| 200+ | ||
| 500+ | ||
| 1000+ | ||
| 2000+ | ||
| 5000+ | ||
