Description
DeckingPro™ DS65 in RAL 8028 Terra Brown are 4.5 x 65mm A2 stainless steel decking screws for face-fixing thicker coffee and chocolate composite boards, stair treads, and demanding outdoor applications on warm brown decking systems where deeper thread penetration is required. The same warm, rich head colour works equally well on dark hardwood and softwood timber decking in warm brown and dark oak tones, where the longer DS65 provides the structural margin that stair treads, thicker boards, and hardwood subframe systems demand.
The DS65 is the correct length specification for boards above 22mm thickness, composite and hardwood joist systems, and stair tread fixing on brown composite and timber installations where the screw must resist pull-out under sustained foot traffic. The warm, rich RAL 8028 Terra Brown head colour is the same across both DS50 and DS65, ensuring complete colour consistency whether the project uses 50mm for flat deck areas or 65mm for steps and structural fixings.
On coffee and chocolate composite stair treads, the surface that receives the most visible scrutiny from anyone using the deck, a properly matched fixing head is the final detail that confirms a high-quality installation.
Colour-Matched for a Professional Outdoor Finish
RAL 8028 Terra Brown is a deep, warm, amber-inflected brown that sits naturally alongside coffee-toned composite boards and warm hardwood timbers. In strong UK summer sunlight it shows warm, earthy undertones; in overcast conditions it deepens to a rich, muted brown. This tonal behaviour closely mirrors that of the boards it matches, meaning the fixing remains visually consistent with the board across all weather and lighting conditions.
Coffee and chocolate composite boards are chosen for the warmth they bring to an outdoor space, the sense of natural material that the best composite products now convincingly deliver. A silver or grey screw head on a chocolate riser board reintroduces the industrial quality that the board was specifically chosen to avoid. The DS65 in RAL 8028 is the screw that completes the job rather than undoing it. The same principle applies to warm-toned hardwood decking on steps and stair treads, where the fixing is viewed directly and a matched head makes a genuine difference to the finished result.
Substrate compatibility
DeckingPro™ DS65 in RAL 8028 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards 25mm and above - coffee, chocolate, and mocha composite boards requiring deeper joist penetration
- Softwood timber decking - treated and untreated softwood boards in warm brown stained or natural finishes, particularly on stair treads and step risers
- Hardwood timber decking - including dark oak, iroko, ipe, teak and other hardwood boards where a warm brown fixing and greater pull-out depth are both required
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Hardwood and composite joist subframes - where deeper thread engagement provides the necessary pull-out resistance
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Coffee and chocolate composite boards 25mm and above, for greater joist penetration
- Stair treads and riser boards in warm brown composite and timber systems
- Hardwood and softwood timber decking on steps and high-load surfaces
- Composite and hardwood joist subframes on coffee, mocha and warm timber installations
- Commercial balcony and terrace decking in brown composite and hardwood colourways
- High-traffic outdoor platforms requiring structural pull-out resistance in warm brown
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 65mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 8028 Terra Brown |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber or Composite Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS65 technical specification.
Frequently asked questions
When should I use DS65 over DS50 for coffee and brown decking?
Use DS65 for boards 25mm or thicker, on stair treads and high-traffic surfaces, or when fixing into composite or hardwood joist systems. For standard 20 to 22mm boards on softwood subframes, the DS50 in RAL 8028 is the right specification.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS65 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The longer 65mm length makes this the preferred choice for hardwood boards, hardwood joist systems, and stair tread fixing in timber where greater pull-out depth is required. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Which composite decking boards does RAL 8028 Terra Brown match?
RAL 8028 Terra Brown is physically matched to coffee, chocolate, and mocha composite boards from major UK brands. Composite boards do not carry published RAL codes and can vary between batches, check our colour guide before placing a full project order.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many DS65 screws do I need for decking steps?
Allow approximately 6 to 8 screws per stair tread. A 10-step staircase typically requires 60 to 80 screws, covered by a single 100-pack with some to spare for riser boards.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior applications, powder coated in-house to precise RAL standards. The electrostatic process used on every DeckingPro™ screw head produces a bonded, uniform finish with superior UV stability, scratch resistance, and weather performance compared to liquid paint. Coating is applied exclusively to the screw head. The A2 stainless steel thread and shank remain uncoated and fully functional for the life of the installation.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS65 colour options
DeckingPro™ DS65 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Description
DeckingPro™ DS65 in RAL 8028 Terra Brown are 4.5 x 65mm A2 stainless steel decking screws for face-fixing thicker coffee and chocolate composite boards, stair treads, and demanding outdoor applications on warm brown decking systems where deeper thread penetration is required. The same warm, rich head colour works equally well on dark hardwood and softwood timber decking in warm brown and dark oak tones, where the longer DS65 provides the structural margin that stair treads, thicker boards, and hardwood subframe systems demand.
The DS65 is the correct length specification for boards above 22mm thickness, composite and hardwood joist systems, and stair tread fixing on brown composite and timber installations where the screw must resist pull-out under sustained foot traffic. The warm, rich RAL 8028 Terra Brown head colour is the same across both DS50 and DS65, ensuring complete colour consistency whether the project uses 50mm for flat deck areas or 65mm for steps and structural fixings.
On coffee and chocolate composite stair treads, the surface that receives the most visible scrutiny from anyone using the deck, a properly matched fixing head is the final detail that confirms a high-quality installation.
Colour-Matched for a Professional Outdoor Finish
RAL 8028 Terra Brown is a deep, warm, amber-inflected brown that sits naturally alongside coffee-toned composite boards and warm hardwood timbers. In strong UK summer sunlight it shows warm, earthy undertones; in overcast conditions it deepens to a rich, muted brown. This tonal behaviour closely mirrors that of the boards it matches, meaning the fixing remains visually consistent with the board across all weather and lighting conditions.
Coffee and chocolate composite boards are chosen for the warmth they bring to an outdoor space, the sense of natural material that the best composite products now convincingly deliver. A silver or grey screw head on a chocolate riser board reintroduces the industrial quality that the board was specifically chosen to avoid. The DS65 in RAL 8028 is the screw that completes the job rather than undoing it. The same principle applies to warm-toned hardwood decking on steps and stair treads, where the fixing is viewed directly and a matched head makes a genuine difference to the finished result.
Substrate compatibility
DeckingPro™ DS65 in RAL 8028 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards 25mm and above - coffee, chocolate, and mocha composite boards requiring deeper joist penetration
- Softwood timber decking - treated and untreated softwood boards in warm brown stained or natural finishes, particularly on stair treads and step risers
- Hardwood timber decking - including dark oak, iroko, ipe, teak and other hardwood boards where a warm brown fixing and greater pull-out depth are both required
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Hardwood and composite joist subframes - where deeper thread engagement provides the necessary pull-out resistance
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Coffee and chocolate composite boards 25mm and above, for greater joist penetration
- Stair treads and riser boards in warm brown composite and timber systems
- Hardwood and softwood timber decking on steps and high-load surfaces
- Composite and hardwood joist subframes on coffee, mocha and warm timber installations
- Commercial balcony and terrace decking in brown composite and hardwood colourways
- High-traffic outdoor platforms requiring structural pull-out resistance in warm brown
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 65mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 8028 Terra Brown |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber or Composite Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS65 technical specification.
Frequently asked questions
When should I use DS65 over DS50 for coffee and brown decking?
Use DS65 for boards 25mm or thicker, on stair treads and high-traffic surfaces, or when fixing into composite or hardwood joist systems. For standard 20 to 22mm boards on softwood subframes, the DS50 in RAL 8028 is the right specification.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS65 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The longer 65mm length makes this the preferred choice for hardwood boards, hardwood joist systems, and stair tread fixing in timber where greater pull-out depth is required. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Which composite decking boards does RAL 8028 Terra Brown match?
RAL 8028 Terra Brown is physically matched to coffee, chocolate, and mocha composite boards from major UK brands. Composite boards do not carry published RAL codes and can vary between batches, check our colour guide before placing a full project order.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many DS65 screws do I need for decking steps?
Allow approximately 6 to 8 screws per stair tread. A 10-step staircase typically requires 60 to 80 screws, covered by a single 100-pack with some to spare for riser boards.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior applications, powder coated in-house to precise RAL standards. The electrostatic process used on every DeckingPro™ screw head produces a bonded, uniform finish with superior UV stability, scratch resistance, and weather performance compared to liquid paint. Coating is applied exclusively to the screw head. The A2 stainless steel thread and shank remain uncoated and fully functional for the life of the installation.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS65 colour options
DeckingPro™ DS65 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
DeckingPro™ DS65 in RAL 8028 Terra Brown are 4.5 x 65mm A2 stainless steel decking screws for face-fixing thicker coffee and chocolate composite boards, stair treads, and demanding outdoor applications on warm brown decking systems where deeper thread penetration is required. The same warm, rich head colour works equally well on dark hardwood and softwood timber decking in warm brown and dark oak tones, where the longer DS65 provides the structural margin that stair treads, thicker boards, and hardwood subframe systems demand.
The DS65 is the correct length specification for boards above 22mm thickness, composite and hardwood joist systems, and stair tread fixing on brown composite and timber installations where the screw must resist pull-out under sustained foot traffic. The warm, rich RAL 8028 Terra Brown head colour is the same across both DS50 and DS65, ensuring complete colour consistency whether the project uses 50mm for flat deck areas or 65mm for steps and structural fixings.
On coffee and chocolate composite stair treads, the surface that receives the most visible scrutiny from anyone using the deck, a properly matched fixing head is the final detail that confirms a high-quality installation.
Colour-Matched for a Professional Outdoor Finish
RAL 8028 Terra Brown is a deep, warm, amber-inflected brown that sits naturally alongside coffee-toned composite boards and warm hardwood timbers. In strong UK summer sunlight it shows warm, earthy undertones; in overcast conditions it deepens to a rich, muted brown. This tonal behaviour closely mirrors that of the boards it matches, meaning the fixing remains visually consistent with the board across all weather and lighting conditions.
Coffee and chocolate composite boards are chosen for the warmth they bring to an outdoor space, the sense of natural material that the best composite products now convincingly deliver. A silver or grey screw head on a chocolate riser board reintroduces the industrial quality that the board was specifically chosen to avoid. The DS65 in RAL 8028 is the screw that completes the job rather than undoing it. The same principle applies to warm-toned hardwood decking on steps and stair treads, where the fixing is viewed directly and a matched head makes a genuine difference to the finished result.
Substrate compatibility
DeckingPro™ DS65 in RAL 8028 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards 25mm and above - coffee, chocolate, and mocha composite boards requiring deeper joist penetration
- Softwood timber decking - treated and untreated softwood boards in warm brown stained or natural finishes, particularly on stair treads and step risers
- Hardwood timber decking - including dark oak, iroko, ipe, teak and other hardwood boards where a warm brown fixing and greater pull-out depth are both required
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Hardwood and composite joist subframes - where deeper thread engagement provides the necessary pull-out resistance
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Coffee and chocolate composite boards 25mm and above, for greater joist penetration
- Stair treads and riser boards in warm brown composite and timber systems
- Hardwood and softwood timber decking on steps and high-load surfaces
- Composite and hardwood joist subframes on coffee, mocha and warm timber installations
- Commercial balcony and terrace decking in brown composite and hardwood colourways
- High-traffic outdoor platforms requiring structural pull-out resistance in warm brown
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 65mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 8028 Terra Brown |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber or Composite Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS65 technical specification.
Frequently asked questions
When should I use DS65 over DS50 for coffee and brown decking?
Use DS65 for boards 25mm or thicker, on stair treads and high-traffic surfaces, or when fixing into composite or hardwood joist systems. For standard 20 to 22mm boards on softwood subframes, the DS50 in RAL 8028 is the right specification.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS65 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The longer 65mm length makes this the preferred choice for hardwood boards, hardwood joist systems, and stair tread fixing in timber where greater pull-out depth is required. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Which composite decking boards does RAL 8028 Terra Brown match?
RAL 8028 Terra Brown is physically matched to coffee, chocolate, and mocha composite boards from major UK brands. Composite boards do not carry published RAL codes and can vary between batches, check our colour guide before placing a full project order.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many DS65 screws do I need for decking steps?
Allow approximately 6 to 8 screws per stair tread. A 10-step staircase typically requires 60 to 80 screws, covered by a single 100-pack with some to spare for riser boards.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior applications, powder coated in-house to precise RAL standards. The electrostatic process used on every DeckingPro™ screw head produces a bonded, uniform finish with superior UV stability, scratch resistance, and weather performance compared to liquid paint. Coating is applied exclusively to the screw head. The A2 stainless steel thread and shank remain uncoated and fully functional for the life of the installation.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS65 colour options
DeckingPro™ DS65 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
In Stock
| Bulk Discount |
|---|
