Description
DeckingPro™ DS50 in RAL 1019 Grey Beige are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing warm-toned composite decking boards, particularly teak, savanna, and light timber-effect boards where neither a grey nor a brown screw provides an adequate colour match. The same warm grey-beige tone is also well suited to natural cedar, light oak, and teak timber decking boards, where the head colour sits sympathetically against the timber rather than contrasting with it.
RAL 1019 Grey Beige occupies a precise tonal position between warm grey and light brown, making it the natural match for composite boards that reference natural teak, cedar, and light oak timber tones. For contractors and homeowners who have spent time selecting the right board colour, an unmatched silver or anthracite screw on a warm teak-toned deck represents a visible finishing failure. DeckingPro™ DS50 in RAL 1019 closes that gap.
The double countersunk head sits flush below the board surface, and the sharp point drives cleanly into composite boards and timber subframes without pre-drilling under standard conditions.
Colour-Matched for a Professional Outdoor Finish
RAL 1019 Grey Beige is a neutral, desaturated warm tone, earthy without being overtly brown, warm without being yellow. It maps closely to the grey-beige board colourways that UK composite brands describe as teak, savanna, and light natural timber, providing a fixing head that disappears into the mid-tone of the board rather than reading as a distinct colour against it.
The screw head is powder coated in-house to RAL 1019 Grey Beige specification. On teak-toned fascia boards and riser boards where fixings are most visible to someone approaching or using a deck, the result is a surface that reads clean and intentional rather than as a pattern of contrasting dots.
Stock across all 8 DeckingPro™ colours dispatches same or next working day, so no project need be delayed waiting for the right colour fixing.
Substrate compatibility
DeckingPro™ DS50 in RAL 1019 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - teak, savanna, and warm timber-effect composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in natural, oiled, or warm-toned stained finishes
- Hardwood timber decking - teak, light oak, cedar, and other hardwood boards in natural or warm-toned oiled finishes where a grey-beige fixing complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in teak and warm natural finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Teak and warm timber-effect composite deck boards
- Savanna and natural-toned composite board systems
- Hardwood and softwood timber decking in teak, cedar, and light oak tones
- Fascia and perimeter boards on light brown composite and warm timber installations
- Riser boards and stair strings in warm-toned composite and natural timber
- Deck repairs and board replacement on teak-coloured composite and timber systems
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
What decking board colours does RAL 1019 Grey Beige match?
RAL 1019 Grey Beige is physically matched to teak and savanna-toned composite boards from UK suppliers, and suits natural cedar, light oak, and teak timber decking in oiled or natural finishes. It is the closest available RAL match to boards described by manufacturers as teak, light natural, and warm timber-effect finishes. Composite boards do not carry published RAL codes, check our colour guide for the most current matching information.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The grey-beige powder coated head complements natural teak, cedar, and light oak timber boards where a warm neutral fixing head is a more sympathetic match than a standard silver screw. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Is there a difference between teak decking screws and beige decking screws?
The terms refer to the same application. "Teak" describes the board colour; "beige" describes the screw head tone. DeckingPro™ DS50 in RAL 1019 Grey Beige is specifically formulated to match the dominant mid-tone of teak-coloured composite boards, making it the closest available match for this board family in the UK market.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many screws do I need per square metre of decking?
Typically 10 to 14 screws per square metre for standard deck field fixing. Our 200-pack covers a standard residential deck project. For stair risers and fascia-only projects, the 50-pack or 100-pack will often be sufficient.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior use. Every DeckingPro™ screw head is powder coated in-house to a precise RAL standard. The electrostatic process produces a finish that is harder, more UV stable, and more colourfast than conventional paint coatings. The process is applied to the head only, leaving the stainless steel shank and thread unaffected.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Description
DeckingPro™ DS50 in RAL 1019 Grey Beige are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing warm-toned composite decking boards, particularly teak, savanna, and light timber-effect boards where neither a grey nor a brown screw provides an adequate colour match. The same warm grey-beige tone is also well suited to natural cedar, light oak, and teak timber decking boards, where the head colour sits sympathetically against the timber rather than contrasting with it.
RAL 1019 Grey Beige occupies a precise tonal position between warm grey and light brown, making it the natural match for composite boards that reference natural teak, cedar, and light oak timber tones. For contractors and homeowners who have spent time selecting the right board colour, an unmatched silver or anthracite screw on a warm teak-toned deck represents a visible finishing failure. DeckingPro™ DS50 in RAL 1019 closes that gap.
The double countersunk head sits flush below the board surface, and the sharp point drives cleanly into composite boards and timber subframes without pre-drilling under standard conditions.
Colour-Matched for a Professional Outdoor Finish
RAL 1019 Grey Beige is a neutral, desaturated warm tone, earthy without being overtly brown, warm without being yellow. It maps closely to the grey-beige board colourways that UK composite brands describe as teak, savanna, and light natural timber, providing a fixing head that disappears into the mid-tone of the board rather than reading as a distinct colour against it.
The screw head is powder coated in-house to RAL 1019 Grey Beige specification. On teak-toned fascia boards and riser boards where fixings are most visible to someone approaching or using a deck, the result is a surface that reads clean and intentional rather than as a pattern of contrasting dots.
Stock across all 8 DeckingPro™ colours dispatches same or next working day, so no project need be delayed waiting for the right colour fixing.
Substrate compatibility
DeckingPro™ DS50 in RAL 1019 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - teak, savanna, and warm timber-effect composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in natural, oiled, or warm-toned stained finishes
- Hardwood timber decking - teak, light oak, cedar, and other hardwood boards in natural or warm-toned oiled finishes where a grey-beige fixing complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in teak and warm natural finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Teak and warm timber-effect composite deck boards
- Savanna and natural-toned composite board systems
- Hardwood and softwood timber decking in teak, cedar, and light oak tones
- Fascia and perimeter boards on light brown composite and warm timber installations
- Riser boards and stair strings in warm-toned composite and natural timber
- Deck repairs and board replacement on teak-coloured composite and timber systems
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
What decking board colours does RAL 1019 Grey Beige match?
RAL 1019 Grey Beige is physically matched to teak and savanna-toned composite boards from UK suppliers, and suits natural cedar, light oak, and teak timber decking in oiled or natural finishes. It is the closest available RAL match to boards described by manufacturers as teak, light natural, and warm timber-effect finishes. Composite boards do not carry published RAL codes, check our colour guide for the most current matching information.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The grey-beige powder coated head complements natural teak, cedar, and light oak timber boards where a warm neutral fixing head is a more sympathetic match than a standard silver screw. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Is there a difference between teak decking screws and beige decking screws?
The terms refer to the same application. "Teak" describes the board colour; "beige" describes the screw head tone. DeckingPro™ DS50 in RAL 1019 Grey Beige is specifically formulated to match the dominant mid-tone of teak-coloured composite boards, making it the closest available match for this board family in the UK market.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many screws do I need per square metre of decking?
Typically 10 to 14 screws per square metre for standard deck field fixing. Our 200-pack covers a standard residential deck project. For stair risers and fascia-only projects, the 50-pack or 100-pack will often be sufficient.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior use. Every DeckingPro™ screw head is powder coated in-house to a precise RAL standard. The electrostatic process produces a finish that is harder, more UV stable, and more colourfast than conventional paint coatings. The process is applied to the head only, leaving the stainless steel shank and thread unaffected.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
DeckingPro™ DS50 in RAL 1019 Grey Beige are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing warm-toned composite decking boards, particularly teak, savanna, and light timber-effect boards where neither a grey nor a brown screw provides an adequate colour match. The same warm grey-beige tone is also well suited to natural cedar, light oak, and teak timber decking boards, where the head colour sits sympathetically against the timber rather than contrasting with it.
RAL 1019 Grey Beige occupies a precise tonal position between warm grey and light brown, making it the natural match for composite boards that reference natural teak, cedar, and light oak timber tones. For contractors and homeowners who have spent time selecting the right board colour, an unmatched silver or anthracite screw on a warm teak-toned deck represents a visible finishing failure. DeckingPro™ DS50 in RAL 1019 closes that gap.
The double countersunk head sits flush below the board surface, and the sharp point drives cleanly into composite boards and timber subframes without pre-drilling under standard conditions.
Colour-Matched for a Professional Outdoor Finish
RAL 1019 Grey Beige is a neutral, desaturated warm tone, earthy without being overtly brown, warm without being yellow. It maps closely to the grey-beige board colourways that UK composite brands describe as teak, savanna, and light natural timber, providing a fixing head that disappears into the mid-tone of the board rather than reading as a distinct colour against it.
The screw head is powder coated in-house to RAL 1019 Grey Beige specification. On teak-toned fascia boards and riser boards where fixings are most visible to someone approaching or using a deck, the result is a surface that reads clean and intentional rather than as a pattern of contrasting dots.
Stock across all 8 DeckingPro™ colours dispatches same or next working day, so no project need be delayed waiting for the right colour fixing.
Substrate compatibility
DeckingPro™ DS50 in RAL 1019 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - teak, savanna, and warm timber-effect composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in natural, oiled, or warm-toned stained finishes
- Hardwood timber decking - teak, light oak, cedar, and other hardwood boards in natural or warm-toned oiled finishes where a grey-beige fixing complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in teak and warm natural finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Teak and warm timber-effect composite deck boards
- Savanna and natural-toned composite board systems
- Hardwood and softwood timber decking in teak, cedar, and light oak tones
- Fascia and perimeter boards on light brown composite and warm timber installations
- Riser boards and stair strings in warm-toned composite and natural timber
- Deck repairs and board replacement on teak-coloured composite and timber systems
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1019 Grey Beige |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
What decking board colours does RAL 1019 Grey Beige match?
RAL 1019 Grey Beige is physically matched to teak and savanna-toned composite boards from UK suppliers, and suits natural cedar, light oak, and teak timber decking in oiled or natural finishes. It is the closest available RAL match to boards described by manufacturers as teak, light natural, and warm timber-effect finishes. Composite boards do not carry published RAL codes, check our colour guide for the most current matching information.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The grey-beige powder coated head complements natural teak, cedar, and light oak timber boards where a warm neutral fixing head is a more sympathetic match than a standard silver screw. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Is there a difference between teak decking screws and beige decking screws?
The terms refer to the same application. "Teak" describes the board colour; "beige" describes the screw head tone. DeckingPro™ DS50 in RAL 1019 Grey Beige is specifically formulated to match the dominant mid-tone of teak-coloured composite boards, making it the closest available match for this board family in the UK market.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
How many screws do I need per square metre of decking?
Typically 10 to 14 screws per square metre for standard deck field fixing. Our 200-pack covers a standard residential deck project. For stair risers and fascia-only projects, the 50-pack or 100-pack will often be sufficient.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service.
Powder coated decking screws
At RALfixings we specialise in colour-matched fixings for exterior use. Every DeckingPro™ screw head is powder coated in-house to a precise RAL standard. The electrostatic process produces a finish that is harder, more UV stable, and more colourfast than conventional paint coatings. The process is applied to the head only, leaving the stainless steel shank and thread unaffected.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
In Stock
| Bulk Discount |
|---|
