Description
DeckingPro™ DS50 in RAL 7016 Anthracite Grey are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing composite and timber decking boards, fascia boards, riser boards, stair strings, and perimeter framing where a hidden clip system cannot be used. The deep blue-grey of RAL 7016 is equally at home on dark-stained hardwood and softwood timber decking, where the head tone sits naturally against the board surface rather than reading as a contrasting silver element.
Designed for landscape contractors and DIY installers working with composite and timber decking, DeckingPro™ DS50 screws provide consistent thread engagement through the board and into the timber subframe, combining the structural performance of a purpose-built decking screw with a colour-matched powder coated head that sits flush and virtually disappears into the board surface.
Where visible fixings are required on steps, risers, fascia boards, perimeter boards and decking edges, DeckingPro™ provides a colour-matched screw engineered to blend with the board rather than interrupt it. The double countersunk head pulls cleanly below the board surface, and the PZ2 drive provides reliable torque transfer without cam-out under power driving.
The sharp point and single-start thread allow efficient installation directly into hardwood-capped composite boards and softwood or treated timber joists without pre-drilling in most standard applications.
Colour-Matched for a Professional Outdoor Finish
RAL 7016 Anthracite Grey is the dominant colour in UK composite decking. It is a confirmed colour match for Dino Decking Anthracite, and closely matches the charcoal and black-grey board variants from leading UK brands. It is also widely compatible with anthracite aluminium decking subframes, anthracite powder-coated balustrade systems, and anthracite bi-fold door frames, making it the single most versatile fixing colour for contemporary outdoor spaces.
The screw head is powder coated in RAL 7016 Anthracite Grey, allowing the fixing to integrate cleanly with dark boards and disappear against the surface rather than drawing the eye. Whether used on a main deck field, a fascia board wrap, or a staircase riser, the fixing reads as part of the board rather than a break in it.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, enabling contractors and homeowners to maintain colour consistency across fascia, riser, and perimeter fixings on the same project.
Substrate compatibility
DeckingPro™ DS50 in RAL 7016 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - anthracite, charcoal, and dark grey composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards with dark grey, charcoal, or anthracite stained finishes
- Hardwood timber decking - dark hardwood boards including ebonised oak, dark iroko, and similar species, or hardwood boards with a dark grey or anthracite oil finish
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in dark grey and anthracite finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Composite deck boards in anthracite, charcoal and dark grey tones
- Dark-stained hardwood and softwood timber decking boards
- Fascia board fixing on dark composite and timber perimeter boards
- Riser boards and stair strings in dark grey composite and timber
- Balcony and terrace decking where clip systems are not possible
- Decking repairs and replacement boards matching existing dark fixings
Pack sizes available
Supplied in packs of:
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 7016 Anthracite Grey |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 7016 match?
RAL 7016 Anthracite Grey is a confirmed colour match for Dino Decking Anthracite and is the closest available RAL match to Cladco Charcoal and Ultradecking dark grey boards. It also suits dark-stained hardwood and softwood timber decking in anthracite and charcoal finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend ordering a sample or checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The anthracite grey powder coated head suits dark-stained, ebonised, or naturally dark hardwood and softwood boards where a colour-matched fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
What size screws do I need for composite decking?
For standard composite boards of 20 to 22mm thickness on softwood or treated timber joists, the 50mm length provides adequate penetration depth. For thicker boards (25mm+), boards fixed to hardwood joists, or areas subject to high foot traffic such as stair treads, use the 65mm DS65 variant for increased pull-out resistance.
Are these screws suitable for outdoor use?
DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, which provides strong corrosion resistance for standard UK outdoor environments including gardens, terraces, and commercial decking installations.
How many screws do I need per square metre of decking?
For a standard deck with boards fixed at both edges per joist bay, you will typically need 10 to 14 screws per square metre depending on board width and joist spacing. A 15m² deck will typically require 150 to 200 screws. Our 200-pack is sized to cover a standard project.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications, producing a head finish that blends with the board surface and maintains its appearance in UK outdoor conditions.
The electrostatic powder coating process produces a durable, uniform finish applied exclusively to the screw head, preserving the thread integrity and mechanical performance of the A2 stainless steel base screw while delivering a colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Description
DeckingPro™ DS50 in RAL 7016 Anthracite Grey are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing composite and timber decking boards, fascia boards, riser boards, stair strings, and perimeter framing where a hidden clip system cannot be used. The deep blue-grey of RAL 7016 is equally at home on dark-stained hardwood and softwood timber decking, where the head tone sits naturally against the board surface rather than reading as a contrasting silver element.
Designed for landscape contractors and DIY installers working with composite and timber decking, DeckingPro™ DS50 screws provide consistent thread engagement through the board and into the timber subframe, combining the structural performance of a purpose-built decking screw with a colour-matched powder coated head that sits flush and virtually disappears into the board surface.
Where visible fixings are required on steps, risers, fascia boards, perimeter boards and decking edges, DeckingPro™ provides a colour-matched screw engineered to blend with the board rather than interrupt it. The double countersunk head pulls cleanly below the board surface, and the PZ2 drive provides reliable torque transfer without cam-out under power driving.
The sharp point and single-start thread allow efficient installation directly into hardwood-capped composite boards and softwood or treated timber joists without pre-drilling in most standard applications.
Colour-Matched for a Professional Outdoor Finish
RAL 7016 Anthracite Grey is the dominant colour in UK composite decking. It is a confirmed colour match for Dino Decking Anthracite, and closely matches the charcoal and black-grey board variants from leading UK brands. It is also widely compatible with anthracite aluminium decking subframes, anthracite powder-coated balustrade systems, and anthracite bi-fold door frames, making it the single most versatile fixing colour for contemporary outdoor spaces.
The screw head is powder coated in RAL 7016 Anthracite Grey, allowing the fixing to integrate cleanly with dark boards and disappear against the surface rather than drawing the eye. Whether used on a main deck field, a fascia board wrap, or a staircase riser, the fixing reads as part of the board rather than a break in it.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, enabling contractors and homeowners to maintain colour consistency across fascia, riser, and perimeter fixings on the same project.
Substrate compatibility
DeckingPro™ DS50 in RAL 7016 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - anthracite, charcoal, and dark grey composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards with dark grey, charcoal, or anthracite stained finishes
- Hardwood timber decking - dark hardwood boards including ebonised oak, dark iroko, and similar species, or hardwood boards with a dark grey or anthracite oil finish
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in dark grey and anthracite finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Composite deck boards in anthracite, charcoal and dark grey tones
- Dark-stained hardwood and softwood timber decking boards
- Fascia board fixing on dark composite and timber perimeter boards
- Riser boards and stair strings in dark grey composite and timber
- Balcony and terrace decking where clip systems are not possible
- Decking repairs and replacement boards matching existing dark fixings
Pack sizes available
Supplied in packs of:
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 7016 Anthracite Grey |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 7016 match?
RAL 7016 Anthracite Grey is a confirmed colour match for Dino Decking Anthracite and is the closest available RAL match to Cladco Charcoal and Ultradecking dark grey boards. It also suits dark-stained hardwood and softwood timber decking in anthracite and charcoal finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend ordering a sample or checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The anthracite grey powder coated head suits dark-stained, ebonised, or naturally dark hardwood and softwood boards where a colour-matched fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
What size screws do I need for composite decking?
For standard composite boards of 20 to 22mm thickness on softwood or treated timber joists, the 50mm length provides adequate penetration depth. For thicker boards (25mm+), boards fixed to hardwood joists, or areas subject to high foot traffic such as stair treads, use the 65mm DS65 variant for increased pull-out resistance.
Are these screws suitable for outdoor use?
DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, which provides strong corrosion resistance for standard UK outdoor environments including gardens, terraces, and commercial decking installations.
How many screws do I need per square metre of decking?
For a standard deck with boards fixed at both edges per joist bay, you will typically need 10 to 14 screws per square metre depending on board width and joist spacing. A 15m² deck will typically require 150 to 200 screws. Our 200-pack is sized to cover a standard project.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications, producing a head finish that blends with the board surface and maintains its appearance in UK outdoor conditions.
The electrostatic powder coating process produces a durable, uniform finish applied exclusively to the screw head, preserving the thread integrity and mechanical performance of the A2 stainless steel base screw while delivering a colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
DeckingPro™ DS50 in RAL 7016 Anthracite Grey are 4.5 x 50mm A2 stainless steel decking screws developed for face-fixing composite and timber decking boards, fascia boards, riser boards, stair strings, and perimeter framing where a hidden clip system cannot be used. The deep blue-grey of RAL 7016 is equally at home on dark-stained hardwood and softwood timber decking, where the head tone sits naturally against the board surface rather than reading as a contrasting silver element.
Designed for landscape contractors and DIY installers working with composite and timber decking, DeckingPro™ DS50 screws provide consistent thread engagement through the board and into the timber subframe, combining the structural performance of a purpose-built decking screw with a colour-matched powder coated head that sits flush and virtually disappears into the board surface.
Where visible fixings are required on steps, risers, fascia boards, perimeter boards and decking edges, DeckingPro™ provides a colour-matched screw engineered to blend with the board rather than interrupt it. The double countersunk head pulls cleanly below the board surface, and the PZ2 drive provides reliable torque transfer without cam-out under power driving.
The sharp point and single-start thread allow efficient installation directly into hardwood-capped composite boards and softwood or treated timber joists without pre-drilling in most standard applications.
Colour-Matched for a Professional Outdoor Finish
RAL 7016 Anthracite Grey is the dominant colour in UK composite decking. It is a confirmed colour match for Dino Decking Anthracite, and closely matches the charcoal and black-grey board variants from leading UK brands. It is also widely compatible with anthracite aluminium decking subframes, anthracite powder-coated balustrade systems, and anthracite bi-fold door frames, making it the single most versatile fixing colour for contemporary outdoor spaces.
The screw head is powder coated in RAL 7016 Anthracite Grey, allowing the fixing to integrate cleanly with dark boards and disappear against the surface rather than drawing the eye. Whether used on a main deck field, a fascia board wrap, or a staircase riser, the fixing reads as part of the board rather than a break in it.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, enabling contractors and homeowners to maintain colour consistency across fascia, riser, and perimeter fixings on the same project.
Substrate compatibility
DeckingPro™ DS50 in RAL 7016 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - anthracite, charcoal, and dark grey composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards with dark grey, charcoal, or anthracite stained finishes
- Hardwood timber decking - dark hardwood boards including ebonised oak, dark iroko, and similar species, or hardwood boards with a dark grey or anthracite oil finish
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in dark grey and anthracite finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Composite deck boards in anthracite, charcoal and dark grey tones
- Dark-stained hardwood and softwood timber decking boards
- Fascia board fixing on dark composite and timber perimeter boards
- Riser boards and stair strings in dark grey composite and timber
- Balcony and terrace decking where clip systems are not possible
- Decking repairs and replacement boards matching existing dark fixings
Pack sizes available
Supplied in packs of:
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 7016 Anthracite Grey |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 7016 match?
RAL 7016 Anthracite Grey is a confirmed colour match for Dino Decking Anthracite and is the closest available RAL match to Cladco Charcoal and Ultradecking dark grey boards. It also suits dark-stained hardwood and softwood timber decking in anthracite and charcoal finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend ordering a sample or checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The anthracite grey powder coated head suits dark-stained, ebonised, or naturally dark hardwood and softwood boards where a colour-matched fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
What size screws do I need for composite decking?
For standard composite boards of 20 to 22mm thickness on softwood or treated timber joists, the 50mm length provides adequate penetration depth. For thicker boards (25mm+), boards fixed to hardwood joists, or areas subject to high foot traffic such as stair treads, use the 65mm DS65 variant for increased pull-out resistance.
Are these screws suitable for outdoor use?
DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, which provides strong corrosion resistance for standard UK outdoor environments including gardens, terraces, and commercial decking installations.
How many screws do I need per square metre of decking?
For a standard deck with boards fixed at both edges per joist bay, you will typically need 10 to 14 screws per square metre depending on board width and joist spacing. A 15m² deck will typically require 150 to 200 screws. Our 200-pack is sized to cover a standard project.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications, producing a head finish that blends with the board surface and maintains its appearance in UK outdoor conditions.
The electrostatic powder coating process produces a durable, uniform finish applied exclusively to the screw head, preserving the thread integrity and mechanical performance of the A2 stainless steel base screw while delivering a colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
In Stock
| Bulk Discount |
|---|
