Description
DeckingPro™ DS50 in RAL 1015 Light Ivory are 4.5 x 50mm A2 stainless steel decking screws designed for face-fixing light-coloured composite decking boards, fascia boards, riser boards, and perimeter framing where a colour-matched fixing is essential to maintain the clean, pale aesthetic of the finished deck. The same warm ivory tone also suits pale and cream-stained softwood and hardwood timber decking, where a light-coloured head is a more considered choice than a standard silver screw against a pale surface.
Light and cream-toned composite boards are unforgiving when fixed with unmatched screws. A standard silver or anthracite head reads as an obvious intrusion against a pale surface. DeckingPro™ DS50 in RAL 1015 eliminates that compromise entirely, providing a screw head that integrates with the board tone rather than contrasting with it. The double countersunk profile pulls cleanly below the surface, and the PZ2 drive provides reliable engagement under power driving.
The sharp point and single-start thread allow efficient installation directly into composite decking boards and timber subframes without pre-drilling in standard applications, making this a practical choice for both professional installers and confident DIY projects.
Colour-Matched for a Professional Outdoor Finish
RAL 1015 Light Ivory sits at the pale end of the beige and cream spectrum, a warm, soft off-white that has become increasingly popular in composite decking as an alternative to the grey-dominated palette. It complements natural garden settings, pale limestone paving, white render, and timber-framed outdoor structures where a warmer neutral tone suits the surroundings better than a cool grey.
The screw head is powder coated in-house to RAL 1015 Light Ivory specification, producing a consistent head colour that holds its tone under prolonged UV exposure in UK outdoor conditions. On fascia boards and riser boards where fixings are viewed at close range, a properly matched head removes the visual noise of an unmatched screw entirely.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, so matching screws across your complete project requires no waiting for bespoke orders.
Substrate compatibility
DeckingPro™ DS50 in RAL 1015 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - light ivory, cream, and pale composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in pale, cream-stained, or lightly oiled natural finishes
- Hardwood timber decking - light-toned hardwood boards including pale oak, ash, and similar species where an ivory fixing head complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in pale and ivory finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Light and cream composite deck boards
- Fascia board fixing on pale or ivory-toned composite and timber systems
- Softwood and hardwood timber decking in pale, cream-stained, or lightly oiled finishes
- Riser boards and stair strings in light-coloured composite and pale timber
- Perimeter board fixing and decking edge detail
- Deck repairs matching fixings on existing light composite and pale timber installations
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 1015 match?
RAL 1015 Light Ivory is the closest available RAL match to ivory and cream-toned composite decking boards from UK brands, and suits pale oak, ash, and cream-stained softwood timber boards in natural or lightly oiled finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The ivory powder coated head suits pale oak, ash, and cream-stained timber decking boards where a light-coloured fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Are ivory decking screws available in stainless steel?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel. The powder coated head finish is applied to the screw head only, leaving the stainless steel thread and shank fully intact for corrosion resistance.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
Will the ivory powder coat fade over time outdoors?
The electrostatic powder coating process produces a UV-resistant finish that holds its colour well under normal UK outdoor exposure. Light colours are more susceptible to visible soiling than dark colours, but the coating itself is designed to be colourfast and weather resistant for the life of the deck installation.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications. The electrostatic powder coating process is applied to the screw head only, preserving thread integrity and mechanical performance while delivering a durable, colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Description
DeckingPro™ DS50 in RAL 1015 Light Ivory are 4.5 x 50mm A2 stainless steel decking screws designed for face-fixing light-coloured composite decking boards, fascia boards, riser boards, and perimeter framing where a colour-matched fixing is essential to maintain the clean, pale aesthetic of the finished deck. The same warm ivory tone also suits pale and cream-stained softwood and hardwood timber decking, where a light-coloured head is a more considered choice than a standard silver screw against a pale surface.
Light and cream-toned composite boards are unforgiving when fixed with unmatched screws. A standard silver or anthracite head reads as an obvious intrusion against a pale surface. DeckingPro™ DS50 in RAL 1015 eliminates that compromise entirely, providing a screw head that integrates with the board tone rather than contrasting with it. The double countersunk profile pulls cleanly below the surface, and the PZ2 drive provides reliable engagement under power driving.
The sharp point and single-start thread allow efficient installation directly into composite decking boards and timber subframes without pre-drilling in standard applications, making this a practical choice for both professional installers and confident DIY projects.
Colour-Matched for a Professional Outdoor Finish
RAL 1015 Light Ivory sits at the pale end of the beige and cream spectrum, a warm, soft off-white that has become increasingly popular in composite decking as an alternative to the grey-dominated palette. It complements natural garden settings, pale limestone paving, white render, and timber-framed outdoor structures where a warmer neutral tone suits the surroundings better than a cool grey.
The screw head is powder coated in-house to RAL 1015 Light Ivory specification, producing a consistent head colour that holds its tone under prolonged UV exposure in UK outdoor conditions. On fascia boards and riser boards where fixings are viewed at close range, a properly matched head removes the visual noise of an unmatched screw entirely.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, so matching screws across your complete project requires no waiting for bespoke orders.
Substrate compatibility
DeckingPro™ DS50 in RAL 1015 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - light ivory, cream, and pale composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in pale, cream-stained, or lightly oiled natural finishes
- Hardwood timber decking - light-toned hardwood boards including pale oak, ash, and similar species where an ivory fixing head complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in pale and ivory finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Light and cream composite deck boards
- Fascia board fixing on pale or ivory-toned composite and timber systems
- Softwood and hardwood timber decking in pale, cream-stained, or lightly oiled finishes
- Riser boards and stair strings in light-coloured composite and pale timber
- Perimeter board fixing and decking edge detail
- Deck repairs matching fixings on existing light composite and pale timber installations
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 1015 match?
RAL 1015 Light Ivory is the closest available RAL match to ivory and cream-toned composite decking boards from UK brands, and suits pale oak, ash, and cream-stained softwood timber boards in natural or lightly oiled finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The ivory powder coated head suits pale oak, ash, and cream-stained timber decking boards where a light-coloured fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Are ivory decking screws available in stainless steel?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel. The powder coated head finish is applied to the screw head only, leaving the stainless steel thread and shank fully intact for corrosion resistance.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
Will the ivory powder coat fade over time outdoors?
The electrostatic powder coating process produces a UV-resistant finish that holds its colour well under normal UK outdoor exposure. Light colours are more susceptible to visible soiling than dark colours, but the coating itself is designed to be colourfast and weather resistant for the life of the deck installation.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications. The electrostatic powder coating process is applied to the screw head only, preserving thread integrity and mechanical performance while delivering a durable, colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
Delivery & Shipping Terms
1. Where We Deliver
We currently ship to addresses within the United Kingdom only.
If you require delivery outside the UK, this must be arranged in advance. Where international delivery is agreed:
- You are fully responsible for all import duties, taxes, and customs charges, including any fees for customs paperwork.
- RALfixings accepts no liability for customs delays or additional costs associated with international shipments.
2. Delivery Timescales
Our products fall into two categories: in-stock and made-to-order (bespoke) items.
In-Stock Items
- Usually dispatched within 1–2 working days.
- Delivery typically takes 1–3 working days from the dispatch date.
Powder Coated / Made-to-Order Items
- Typically dispatched within 3–5 working days, but may take up to 10 working days during busy periods.
- Delivery typically takes 1–3 working days after dispatch.
All quoted times are estimates, not guarantees. Delivery times may be affected by stock availability, courier performance, weather, or other factors beyond our control.
3. Shipping Costs
- Shipping charges are based on order weight and destination.
- The exact shipping cost will be shown at checkout before payment.
- Additional shipping charges may apply to remote areas or multiple consignments.
4. Tracking and Responsibility
All orders are shipped via tracked courier services to ensure maximum security and visibility.
Once your order has been dispatched:
- You will receive an order dispatch email letting you know your order is on it's way, and another email from Royal Mail or the chosen courier with your tracking information. If you have supplied a UK phone number you may also recieve a tracking text from Royal Mail or the chosen courier.
- Responsibility for the goods passes to you upon dispatch.
- RALfixings is not liable for loss or damage in transit. Please contact the courier directly with your tracking number if issues arise.
5. Missed Deliveries or Delays
If your parcel cannot be delivered and is returned to us:
- We can resend it, but an additional delivery charge will apply.
- We are not responsible for courier delays or failed delivery attempts.
If your order hasn’t arrived within the estimated delivery window, please contact us as soon as possible at info@ralfixings.com.
Order Amendments & Cancellations
Changing an Order
We begin preparing orders quickly — especially made-to-order items.
- If you need to amend your order, please contact us within 24 hours or as soon as possible.
- After this period, it may be too late to make changes as your order may already be in production or dispatched.
- If you wish to add items, and your order hasn’t yet shipped, we may be able to combine them. Otherwise, a new order (and delivery charge) will apply.
Returns & Refunds
1. Your Right to Cancel – B2C Customers Only
Under the Consumer Contracts Regulations 2013, B2C customers have the right to cancel certain purchases made online within 14 days of delivery.
However, this does not apply to:
- Bespoke or made-to-order goods — including all powder coated screws and fixings manufactured specifically for your order.
If your order includes stocked items only, you may cancel and return those goods within 14 days of receipt. You must:
- Inform us in writing via email within 14 days.
- Return the goods at your own cost, in their original condition and packaging.
- Ensure the items are received by us within 30 days of delivery.
We recommend using a tracked and insured delivery service for any returns, as we are not responsible for items lost or damaged in return transit.
2. Faulty or Incorrect Items
If you receive goods that are:
- Faulty, or
- Incorrectly supplied (e.g. wrong size, colour, or product)
Please notify us within 30 days of receiving the goods.
We will:
- Replace the items where possible, or
- Issue a refund if replacement is not appropriate.
You may be asked to return the faulty items for inspection before a refund or exchange is processed.
Once screws have been installed or used, they cannot be returned or refunded, unless faulty.
3. Refund Processing
- Refunds (where applicable) are processed within 5 working days of receiving the returned items.
- Refunds are only issued to the original payment method.
- Refunds cannot be made to a different card or by other means.
- Delivery charges are non-refundable unless your entire order was cancelled before dispatch or the goods were faulty or incorrect.
Returns Address
To return items, please send them to:
FAO: Jon Lett
RALfixings Ltd
26a Queens Road
Knaphill
Surrey
GU212DX
B2B Orders & Restocking Fee
The rights described above apply primarily to consumers (B2C). If you are a business customer (B2B), statutory cancellation rights under the Consumer Contracts Regulations do not apply.
Returns from business customers are accepted at our sole discretion, and only if agreed in writing before the goods are returned.
All authorised B2B returns are subject to a 15% restocking fee, which will be deducted from the final refund amount. This fee covers the cost of inspection, repackaging, and administrative processing.
Returned goods must be:
- In resaleable, unused condition
- In their original packaging
- Returned at the buyer’s expense via a tracked delivery service
We do not accept returns of any bespoke or made-to-order products under any circumstances unless the item is faulty.
SIMPLE TEST - CAN YOU SEE THIS?
If you see this, the partial is loading.
Description
DeckingPro™ DS50 in RAL 1015 Light Ivory are 4.5 x 50mm A2 stainless steel decking screws designed for face-fixing light-coloured composite decking boards, fascia boards, riser boards, and perimeter framing where a colour-matched fixing is essential to maintain the clean, pale aesthetic of the finished deck. The same warm ivory tone also suits pale and cream-stained softwood and hardwood timber decking, where a light-coloured head is a more considered choice than a standard silver screw against a pale surface.
Light and cream-toned composite boards are unforgiving when fixed with unmatched screws. A standard silver or anthracite head reads as an obvious intrusion against a pale surface. DeckingPro™ DS50 in RAL 1015 eliminates that compromise entirely, providing a screw head that integrates with the board tone rather than contrasting with it. The double countersunk profile pulls cleanly below the surface, and the PZ2 drive provides reliable engagement under power driving.
The sharp point and single-start thread allow efficient installation directly into composite decking boards and timber subframes without pre-drilling in standard applications, making this a practical choice for both professional installers and confident DIY projects.
Colour-Matched for a Professional Outdoor Finish
RAL 1015 Light Ivory sits at the pale end of the beige and cream spectrum, a warm, soft off-white that has become increasingly popular in composite decking as an alternative to the grey-dominated palette. It complements natural garden settings, pale limestone paving, white render, and timber-framed outdoor structures where a warmer neutral tone suits the surroundings better than a cool grey.
The screw head is powder coated in-house to RAL 1015 Light Ivory specification, producing a consistent head colour that holds its tone under prolonged UV exposure in UK outdoor conditions. On fascia boards and riser boards where fixings are viewed at close range, a properly matched head removes the visual noise of an unmatched screw entirely.
All 8 DeckingPro™ RAL colours are stocked for same or next working day dispatch, so matching screws across your complete project requires no waiting for bespoke orders.
Substrate compatibility
DeckingPro™ DS50 in RAL 1015 is suitable for face-fixing a range of decking board materials to timber and steel subframes. A2 stainless steel is required where fixing into corrosive timber species.
- Composite decking boards - light ivory, cream, and pale composite boards from UK brands
- Softwood timber decking - treated and untreated softwood boards in pale, cream-stained, or lightly oiled natural finishes
- Hardwood timber decking - light-toned hardwood boards including pale oak, ash, and similar species where an ivory fixing head complements the timber tone
- Corrosive timber species - green oak, cedar, sweet chestnut and other tannin-rich species where A2 stainless steel is required to prevent staining and fixing corrosion
- Fascia and perimeter boards - composite and timber fascia boards, riser boards and stair strings in pale and ivory finishes
Recommended fixing centres: 300mm to 400mm per board, minimum 25mm from board ends and 15mm from board edges.
Suitable for decking applications including
- Light and cream composite deck boards
- Fascia board fixing on pale or ivory-toned composite and timber systems
- Softwood and hardwood timber decking in pale, cream-stained, or lightly oiled finishes
- Riser boards and stair strings in light-coloured composite and pale timber
- Perimeter board fixing and decking edge detail
- Deck repairs matching fixings on existing light composite and pale timber installations
Pack sizes available
- 25
- 50
- 100
- 200
- 500
Trade account holders can access volume pricing on 200, 500, 1,000 and 2,000 unit packs. Apply for a trade account here.
Specification
| Length | 50mm |
| Thread Diameter | 4.5mm |
| Head Type | Double Countersunk |
| Drive Type | Pozi PZ2 |
| Material | A2-304 Stainless Steel |
| Head Finish | Powder Coated RAL 1015 Light Ivory |
| Point Type | Sharp Point |
| Thread Type | Single Start |
| Application | Composite and Timber Decking - Face Fix to Timber Subframe |
| Corrosion Resistance | A2-304 Stainless Steel - suitable for standard UK outdoor exposure including corrosive timber species |
For full dimensions and installation guidance see the DeckingPro™ DS50 technical specification.
Frequently asked questions
Which decking boards does RAL 1015 match?
RAL 1015 Light Ivory is the closest available RAL match to ivory and cream-toned composite decking boards from UK brands, and suits pale oak, ash, and cream-stained softwood timber boards in natural or lightly oiled finishes. Composite boards do not carry published RAL codes and colour can vary between batches. We recommend checking our colour matching guide before placing a full order.
Can these be used on hardwood and softwood timber decking?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel, suitable for softwood, hardwood, and corrosive timber species including green oak and cedar. The ivory powder coated head suits pale oak, ash, and cream-stained timber decking boards where a light-coloured fixing is preferable to a standard silver head. Pre-drilling with a 3.5mm pilot hole is recommended for hardwood boards and fixings close to board edges.
Are ivory decking screws available in stainless steel?
Yes. DeckingPro™ DS50 screws are manufactured from A2-304 stainless steel. The powder coated head finish is applied to the screw head only, leaving the stainless steel thread and shank fully intact for corrosion resistance.
Do I need to pre-drill for these screws?
For composite boards and softwood joists, pre-drilling is not required in most standard applications. For hardwood boards, hardwood joists, or fixings within 15mm of board edges, a 3.5mm pilot hole is recommended to prevent splitting.
Will the ivory powder coat fade over time outdoors?
The electrostatic powder coating process produces a UV-resistant finish that holds its colour well under normal UK outdoor exposure. Light colours are more susceptible to visible soiling than dark colours, but the coating itself is designed to be colourfast and weather resistant for the life of the deck installation.
What are the delivery and lead times on DeckingPro™ screws?
All 8 DeckingPro™ stocked colours are available for same or next working day dispatch on a tracked 24-hour delivery service. Larger trade orders typically dispatch within 1 to 2 working days.
Powder coated decking screws
At RALfixings we specialise in colour-matched visible fixings for exterior applications. Each DeckingPro™ screw is powder coated in-house to precise RAL colour specifications. The electrostatic powder coating process is applied to the screw head only, preserving thread integrity and mechanical performance while delivering a durable, colourfast surface finish on the visible face.
Benefits of powder coated stainless decking screws:
- Scratch resistant
- UV resistant
- Weather resistant
- Colourfast in outdoor conditions
- Rust resistant - A2 stainless steel core
Other DeckingPro™ DS50 colour options
DeckingPro™ DS50 decking screws are available in 8 RAL colours matched to leading UK composite and timber decking board tones.
In Stock
| Bulk Discount |
|---|
